What do I need to burn my own Kickstart ROM's?

[leofoe]

Subject says it all.

[x56h34]

To burn your own roms, you need a screwdriver to take the roms out of the sockets, some alcohol to spill over the roms, and a lighter. :-)

[mr_white]

What you need is a ROM-image for the spesific model you intend to burn ROMS for, a ROM burner and ROM(s) (again, depending on model).
The ROM type to use, which actually is an EPROM, is MX27C4100 from Macronix. AGA and A3000 machines need two ROMS each. others use one.

w

[InTheSand]

@x56h34: Doesn't that turn the Kickstart ROMs into Toaster ROMs?  :-)

 - Ali

[motorollin]

Hi Leo, I have instructions on how to do this for an A1200. What Amiga is it for?

--
moto

[InTheSand]

Wouldn't it just be less hassle to buy some? 3.1 ROMs for the A1200 aren't exactly expensive and you'll at least be supporting the few remaining Amiga dealers...

 - Ali

[motorollin]

Maybe he wants to customise it.

--
moto

[leofoe]

@x56h34: tried that one already. It didn't work :-D
@mr_white: any special software needed?
@motorollin: I have most Amiga models. But I could start with the A1200 ROM's :-)  

[motorollin]

Have a look at this thread. I have posted some instructions I found on how to burn ROMs for the A1200.

--
moto

[mr_white]

You need a Windows PC and a ROM burner. Software for ROM burner follows all computer controlled ROM-burners. ROM-burners in general are expensive though.
To obtain a ROM image you can copy them from an amiga (same model) which have the ROM version you desire by using a program called TransRom.

w

[Iggy_Drougge]

The cost of a PROM burner is much higher than that of Kickstart ROMs. It doesn't make sense economically, piracy issues aside.

[JimS]

Look at the EEprom hack on Aminet. You can build a board like a ROM switcher, but using eeproms. Like eproms, they keep their data when powered off, but don't require a special programmer to burn them.

[motorollin]

Iggy_Drougge wrote:
The cost of a PROM burner is much higher than that of Kickstart ROMs. It doesn't make sense economically, piracy issues aside.

Piracy is not the only reason for burning an ROM image. There is software which can insert BlizKick modules or the OS>=3.5 ROM updates in to a 3.1 kickstart image. Burning them to a chip makes them available from cold boot and eliminates Setpatch and BlizKick reboots.

--
moto

[Noster]

Hi

> Piracy is not the only reason for burning an ROM image.
> There is software which can insert BlizKick modules or the
> OS>=3.5 ROM updates in to a 3.1 kickstart image. Burning
> them to a chip makes them available from cold boot and
> eliminates Setpatch and BlizKick reboots.
You could purchase a KickFlashOS4 or a Romulus to speed-up coldstart. This way you needn't to disassable your Amiga everytime you change/patch your Kickstart.

Noster

[motorollin]

Noster wrote:
You could purchase a KickFlashOS4 or a Romulus

...if you have Zorro slots. A1200s don't, so replacing the chip is the only option.

--
moto