Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Cyberstorm MK1 060  (Read 1871 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Robert17Topic starter

  • Hero Member
  • *****
  • Join Date: Apr 2004
  • Posts: 1011
    • Show only replies by Robert17
Cyberstorm MK1 060
« on: May 03, 2006, 10:45:16 PM »
hey all just got one of the above, it came with 24mb ram but I'm trying to get 2 x 32mb simms to work with no luck, I've looked over at amiga hardware for the jumper settings but it's unclear as to which way up the memory daughterboard would be whilst making the settings, all I know is one way I get no memory from the cyberstorm, the other way I get a yellow screen on boot.

any help appreciated :)

Robert
Logged
Member of the Lincs Amiga Group, UK :-)
 

Offline Boot_WB

  • Hero Member
  • *****
  • Join Date: Feb 2005
  • Posts: 1326
    • Show only replies by Boot_WB
    • http://www.hullchimneyservices.co.uk
Re: Cyberstorm MK1 060
« Reply #1 on: May 04, 2006, 01:18:19 AM »
Hi Rob, the dowloadable PDF manual at amiga.resource.cx has both English and German translations - the second half of the pdf is in English.
If I'm reading it reight it suggests the 'right way up' is looking at the jumper block with the ram-board connector at the bottom.

If it is working with the 24mb configuration can you not determine which way is up from the existing jumper settings?
Logged
Mac Mini G4 (1.5GHz, 64MB VRam, 1GB Ram): MorphOS 3.6
Powerbook 5.8 (15", 1.67GHz, 128MB VRam, 1GB Ram): MorphOS 3.8.

Windows-free since 2011-2014 (Damn you Netflix!)
 

Offline adolescent

  • Hero Member
  • *****
  • Join Date: Sep 2003
  • Posts: 3056
    • Show only replies by adolescent
Re: Cyberstorm MK1 060
« Reply #2 on: May 04, 2006, 01:20:56 AM »
From the manual:

Quote
The following table shows the jumper positions, looking down onto the jumpers while the connector is pointing downwards.
Logged
Time to move on.  Bye Amiga.org.  :(
 

Offline jutrem

  • Jr. Member
  • **
  • Join Date: Nov 2002
  • Posts: 67
    • Show only replies by jutrem
Re: Cyberstorm MK1 060
« Reply #3 on: May 04, 2006, 02:19:32 AM »
 Make sure to try a few different brands of memory. I have only been able to get some 32mb SIMMs to work with this board.
The jumper settings are also at the big book off amiga hardware site.

Quote

Robert17 wrote:
hey all just got one of the above, it came with 24mb ram but I'm trying to get 2 x 32mb simms to work with no luck, I've looked over at amiga hardware for the jumper settings but it's unclear as to which way up the memory daughterboard would be whilst making the settings, all I know is one way I get no memory from the cyberstorm, the other way I get a yellow screen on boot.

any help appreciated :)

Robert
Logged
 

Offline Brian

  • Hero Member
  • *****
  • Join Date: Mar 2003
  • Posts: 1604
    • Show only replies by Brian
    • http://www.syntaxsociety.se
Re: Cyberstorm MK1 060
« Reply #4 on: May 04, 2006, 06:27:35 AM »
If I'm not mistaking the MK1 requiers FastPageMode Simms and doesn't work with EDO's. I remember I bought FPM simms specificly for my old CS060MK1.
Logged
 

Offline Robert17Topic starter

  • Hero Member
  • *****
  • Join Date: Apr 2004
  • Posts: 1011
    • Show only replies by Robert17
Re: Cyberstorm MK1 060
« Reply #5 on: May 04, 2006, 07:20:02 AM »
Hey Brian, that would explain it, since I've been trying to use EDO simms.

Can anyone else confirm that a Cyberstorm Mark 1 needs FPM and  NOT EDO simms?

Robert
Logged
Member of the Lincs Amiga Group, UK :-)
 

Offline A1200Power

  • Full Member
  • ***
  • Join Date: Mar 2004
  • Posts: 111
  • Country: 00
    • Show only replies by A1200Power
    • http://Iets met chello :-)
Re: Cyberstorm MK1 060
« Reply #6 on: May 04, 2006, 10:44:16 AM »
NO WAY,


I have my cyberstorm MK-1 and it runs fine with my kind EDO ram. Neverless it might indeed be usefull to check some different simms.


Greetings henk
Logged
#A500
#A500+
 
Pages: [1]   Go Up
« previous next »