Welcome, Guest. Please login or register.

Author Topic: C64 and Amiga as 1541  (Read 1465 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline HellCoderTopic starter

  • Sr. Member
  • ****
  • Join Date: Jun 2004
  • Posts: 279
    • Show only replies by HellCoder
    • http://elasticore.nl
C64 and Amiga as 1541
« on: May 02, 2006, 06:38:54 AM »
Hi,
I know there is a cable available that allows you to connect your commodore 64 to a PC and let the PC act as a 1541 drive. Is this also possible on the Amiga ? I prefer to use my Amiga ofcoz!
 

Offline Tempest

  • Sr. Member
  • ****
  • Join Date: Aug 2004
  • Posts: 290
    • Show only replies by Tempest
Re: C64 and Amiga as 1541
« Reply #1 on: May 02, 2006, 08:52:21 AM »
@HellCoder

Yes it is. I used to use JNet on my Amiga connected to the C64 with a parallel <-> C64 userport cable. Still have the cable, it's easy to make. Instructions are included with JNet.
With Jnet you can use your Amiga as device 7 on a C64 to start and copy files.
 

Offline HellCoderTopic starter

  • Sr. Member
  • ****
  • Join Date: Jun 2004
  • Posts: 279
    • Show only replies by HellCoder
    • http://elasticore.nl
Re: C64 and Amiga as 1541
« Reply #2 on: May 02, 2006, 10:08:17 AM »
Thanks, I also found emul1541, I have to get a cable first. :)
 

Offline Iggy_Drougge

  • Sr. Member
  • ****
  • Join Date: Jul 2003
  • Posts: 333
    • Show only replies by Iggy_Drougge
    • http://www.kristallpojken.org
Re: C64 and Amiga as 1541
« Reply #3 on: May 04, 2006, 04:19:58 PM »
Be careful with the cable, or you may blow an 8520.
A4000/25MHz/64MB/20GB/RetinaBLTZ3/FastlaneZ3/CatweaselMKIII/Ariadne/A2301
A3000/40MHz/32MB/6GB/Merlin/Buddha/X-Surf/FrameMachineII+Prism24
Draco60/50MHz/128MB/15GB/Altais/DracoMotion/DV/IOblix+net