small Dial-up tips?

[AmigaMance]

  Hello.
 If you know any small dial-up tips that offer even a tiny boost in the performance of the connection, please post it here.
 From hardware advices to tcp/ip settings and InitStrings.
  Thank you in advance.

[zefiro]

When I used to go online with my USRobotics 56k Voice Faxmodem
I used, after several experimentations, this InitString:

AT&F2L0&H1&I0&R2&C1&D0W2S2=0/r

For me That's rocksolid!!

[AmigaMance]

Thanks zefiro.

 I'm making this bump in case someone missed this thread.

[zefiro]

That init string is my personal experimentation and works well
on my modem. So let me know if that works well also for you or
someone else. Cheers

[AmigaMance]

@zefiro
 Hmm, just tried it and my modem doesn't accept it. But i know why this happens, it's because my modem is based on a different chipset from the one that USR's are based. So the AT commands are incompatible.
 Most non-USR modems are based on the Rockwell and Lucent chips which are not compatibles.

[zefiro]

Try removing S2=0 because I think it's a specific chipset command

[AmigaMance]

 Nope. That didn't do it.