Welcome, Guest. Please login or register.

Author Topic: New Agian  (Read 6859 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Silver_FBiTopic starter

  • Newbie
  • *
  • Join Date: Feb 2006
  • Posts: 22
    • Show only replies by Silver_FBi
Re: New Agian
« Reply #29 from previous page: February 27, 2006, 04:29:35 PM »
i never got cross dos to work b4 any trick to it.
Fix it, till it\\\'s BROKE!
 

Offline alexh

  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 3644
    • Show only replies by alexh
    • http://thalion.atari.org
Re: New Agian
« Reply #30 on: February 27, 2006, 04:33:06 PM »
As I edited in above. Try to see if you've booted off the wrong disk. If I remember workbench 3 has lots of disks and not just 1 like WB1.3 or WB2.04. Try booting off a different one, or typing "c:rx ram:setup"
 

Offline amigakit

Re: New Agian
« Reply #31 on: February 27, 2006, 04:41:03 PM »
You don't necessarily need Workbench3.1 but you need Kickstart 3.1 ROMs unless you use IDEFIX.  The boot partition is alway set to below 2GB and then you can specify the other paritions as you wish.
www.AmigaKit.com - Amiga Reseller | Manufacturer | Developer

New Products  --   Customer Help & Support -- @amigakit
 

Offline Silver_FBiTopic starter

  • Newbie
  • *
  • Join Date: Feb 2006
  • Posts: 22
    • Show only replies by Silver_FBi
Re: New Agian
« Reply #32 on: February 27, 2006, 04:45:21 PM »
so far no bloody good nothing is working this is getting on ma nervers, anyway thanks V-much 4 your help so far. im off to work soon so if i dont answer u no y.
Fix it, till it\\\'s BROKE!
 

Offline alexh

  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 3644
    • Show only replies by alexh
    • http://thalion.atari.org
Re: New Agian
« Reply #33 on: February 27, 2006, 04:59:07 PM »
If you _ARE_ going to buy the entire kit (ROM's, hard drive, cables etc.) it might be worth considering AmigaKit. It's not a really bad price (perhaps 30% more than normal PC oem retailers) but the level of service, and the Amiga help is beyond what you would get elsewhere (that's what you are paying for).

When you get back, tell me what workbench disks you have (exactly what is written on them and perhaps we'll get closer to running Amiga-Explorer).

If you DO buy a hard drive from AmigaKit, see if they can supply you with a 2.5" to 3.5" adapter so you can plug your drive into an ordinary PC. That is the fastest / best way to install Workbench and transfer data (especially 17Gig!) to the Amiga drive is to mount the drive in UAE.

Or use ADFView http://www.viksoe.dk/code/adfview.htm or even better.
 

Offline amigakit

Re: New Agian
« Reply #34 on: February 27, 2006, 05:39:11 PM »
@alexh

Thanks for your kind comments regarding our service.

I don't think we are 30% more than PC retailers with 2.5" 40GB hard disks.  I have had a quick scout around most main PC retailers and our price is consistent and cheaper than quite a few.
www.AmigaKit.com - Amiga Reseller | Manufacturer | Developer

New Products  --   Customer Help & Support -- @amigakit
 

Offline alexh

  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 3644
    • Show only replies by alexh
    • http://thalion.atari.org
Re: New Agian
« Reply #35 on: February 27, 2006, 06:04:38 PM »
Microdirect 40Gb 2.5" IDE = £45.59

Scan 40Gb 2.5" IDE = £43.89

Dabs.com 40Gb 2.5" IDE = £45.12

Ebuyer 40Gb 2.5" IDE = £44.75

AmigaKit 40Gb 2.5" IDE = £57.99

£57.99 - £43.89 = £14.10 / £43.89 * 100 = 32.13%

But I congratulate you on an amazing webshop. If there is anything AMIGA specific anyone needs I would recommend you without a doubt.
 

Offline Silver_FBiTopic starter

  • Newbie
  • *
  • Join Date: Feb 2006
  • Posts: 22
    • Show only replies by Silver_FBi
Re: New Agian
« Reply #36 on: February 28, 2006, 12:45:24 AM »
did i get this right u can useing uae format install WB an transfer from with-in the pc, i didnt think this was possable. if it is then the link is not a prob just means i need slimline drive, cant give u WB just yet as in at work still till 06:30, im sure its WB 3.0 ORIG il have to check the chip set as the a1200 was not mine was left in a box in a celler, it is now mine an runnig sweet just all the softwear is on pc cos most of the disks have give up on working. as for the amigakit i had a good look my extra stuff will come from there.
Fix it, till it\\\'s BROKE!
 

Offline alexh

  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 3644
    • Show only replies by alexh
    • http://thalion.atari.org
Re: New Agian
« Reply #37 on: February 28, 2006, 11:15:14 AM »
Quote
did i get this right u can useing uae format install WB

I believe so. Never dont it myself though.
 

Offline Silver_FBiTopic starter

  • Newbie
  • *
  • Join Date: Feb 2006
  • Posts: 22
    • Show only replies by Silver_FBi
Re: New Agian
« Reply #38 on: February 28, 2006, 02:11:22 PM »
hmmmmmm im unsure about the partition, how do i know its not picking my pc drive if it does im f***ed.
Dont worry it cant see it as a HD even thogh its there
Fix it, till it\\\'s BROKE!