Blizzard 1260/66 and SCSI Kit Question

[Damion]

I've heard that the 1260 - 66 (60mhz 68060) and
overclocked 50mhz 1260's don't work well with
the SCSI kit. Does anybody know the story on
this? Has anyone here used these two together
successfully? I would be using the same size and
brand SIMM on both units if this makes any
difference.

Thanks in advance for any info...I'm thinking
about possibly getting a better drive setup on
my 1200 project.

-D-

[Zadoc]

Well, I'm using a Bliz060/66MHz and SCSI-IV combo right now without any sign of problem.

The only 'incompatibility' I've come across is that the SCSI-Kit doesn't like EDO SIMMs...

[Damion]

Thanks Zadoc. When I come across one I'll use
the same FPM SIMMs in both units and it should
work it seems. Thanks again.

[JurassicCamper]

The Unstability comes from cheap slow RAM.
Higher clock speed and it getting to hot.

Thermal paste and a good heatsink and fan.
A 486Heatsink & Fan if you can get one fits really well you just have to warm the plastic legs up in hot water to bend them out a few mm's first.

I bought a Blizzard 1260 in Jan 1996 from Gordon Harwood (If any body remembers them)
Overclocked as long back as 1997 to 64Mhz and used it with BlizzardSCSI in a Micronik 1500T Z2 Busboard etc all handing off an unfixed 1d4 AT mobo with no timing problems at all for years before selling it. Used 2 matched 60ns 32Meg Simms.

The 1260 is still going in a RAmiga Z5 tower to this day at my friends house.

My Blizzard 060 603e 240 SCSI / BVision Replaced it and that got overclocked  with no problems.
Replaced the 60Mhz Oscillator with a 70Mhz one from onspec to boost it to  280Mhz with no problems at all. However it failed with to run for more than 5 seconds or so with a 75Mhz oscillator (300Mhz.)

[Damion]

Great. I put a good fan setup on my 1260 - 66
a while ago to replace the crappy one that
came with it.  I've got two identical 60ns
SIMMs...so it should work. I appreciate the
help guys.

[Corrie]

I had a Blizzard 1260 overclocked to 66mhz and the SCSI kit working without any problems at all. Just make sure you are running all the latest drivers. I used EDO simms without any trouble whatsoever. I could only use the simm on the scsi kit due to the fan blocking the use of the simm on the 1260 card... I used a 64mb EDO simm without any drama. It ran like a dream!

[amiga1260]

My Amiga 1200 from Escom has a Blizzard 1260 (not overclocked) and SCSI-kit with two 64 EDO SIMMs at 60 Ns. My Amiga 1200 is powered by A500 power supply. I haven't had problems with it.