Welcome, Guest. Please login or register.

Author Topic: cpu overheating symptons [a2000]  (Read 1088 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline amiga2000Topic starter

  • Full Member
  • ***
  • Join Date: Feb 2002
  • Posts: 129
    • Show only replies by amiga2000
cpu overheating symptons [a2000]
« on: March 08, 2003, 07:13:00 AM »
what are the symptons of an overheated cpu for an Amiga? in my case, I have an A2000/blizzard 2040 -- what seems to happen is: I turn on the computer, right after workbench finishes loading up, the computer crashes (it freezes, and then blacks out)... I opened up the case, andI noticed that the cpu fan for the blizzard2040 had stopped - I disassembled it, and it was full of dust. I cleared it, and after a while, it started rotating, but it still turns rather slow...

does the crashing right after bootup fit in with an overheated cpu? I cannot tell because right now there are manymany things going wrong with my a2000.

if it is the cpu fan, does anyone know what specific model fan I can/should use to replace it? I guess I will have to take the fan out with me to compusa or datavision, but is there anything I should know or be careful of?

thanks,
roy
Amiga 2000 Blizzard040 64MBFast 2MBChip OS3.9 PicassoIV Concierto Paloma Pablo X-Surf Catweasel Highway Norway in a Micronik classic tower



Amiga 1200 BlizzardPPC 128MBFast BVision in a Micronik Infinitiv Mk-2 tower
 

Offline mikeymike

  • Hero Member
  • *****
  • Join Date: Nov 2002
  • Posts: 3420
  • Country: 00
    • Show only replies by mikeymike
Re: cpu overheating symptons [a2000]
« Reply #1 on: March 08, 2003, 09:31:31 AM »
I don't know anything about the accelerator, but you're saying you disassembled the fan - usually there's a sticker on the underside of many of those types of fans that you can temperarily pull off, and drop a couple of drips of oil into the bearings of the fan.  It extends the life (by up to six months, maybe longer) of the fan a bit longer when the fan starts to die.   Stick the sticker back on, run the fan upside down for a while to let the oil get around a bit inside, then screw the fan back onto the CPU.