Welcome, Guest. Please login or register.

Author Topic: dead Workbench 3.1 disk  (Read 1904 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline mosfetTopic starter

  • Newbie
  • *
  • Join Date: Apr 2005
  • Posts: 9
    • Show only replies by mosfet
    • http://mosfet.no-ip.org/jml/
dead Workbench 3.1 disk
« on: April 05, 2005, 03:30:25 PM »
I have "bad block" on my oryginal Workbench 3.1 disk. Do I have to buy new OS? Is there eny website with images os Amiga OS disks??
Amiga Rulez
 

Offline Managarm

  • Sr. Member
  • ****
  • Join Date: Jan 2005
  • Posts: 263
    • Show only replies by Managarm
    • http://www.freewebs.com/robinslair
Re: dead Workbench 3.1 disk
« Reply #1 on: April 05, 2005, 04:05:27 PM »
If you have a hard drive and Workbench is already installed on it you should be able to save this to a new floppy(s).

If not then you could try using a disk repair utility to extract the files onto a new disk. I've actually found that XCopy can sometimes copy a disk but not the error which is handy.

Failing alll that you can get Workbench disks on Ebay most of the time.
 

Offline TheMagicM

  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 2857
    • Show only replies by TheMagicM
    • http://www.BartonekDragRacing.com
Re: dead Workbench 3.1 disk
« Reply #2 on: April 05, 2005, 05:35:07 PM »
I'm sure there are websites with images but they better not show up here.
PowerMac G5 dual 2.0ghz/128meg Radeon/500gb HD/2GB RAM, MorphOS 3.9 registered, user #1900
Powerbook G4 5,6 1.67ghz/2gb RAM, Radeon 9700/250gb hd, MorphOS 3.9 registered #3143
 

Offline TjLaZer

Re: dead Workbench 3.1 disk
« Reply #3 on: April 05, 2005, 07:40:06 PM »
If you need a copy of the disk I will help you out.  IMHO if you own a Amiga with a 3.1 ROM/Original 3.1 disk, you are entitled to a copy of the disk since yours went bad.  Can you transfer a ADF to a disk?  PM me.
Going Bananas over AMIGAs since 1987...

Looking for Fusion Fourty PNG ROMs V3.4?

:flame: :banana: :banana: :banana: