Anyone know how to alter a A2320 to fit an A4000D?

[caliban_6]

I have an Amiga 4000 Desktop and just purchased an A2320 to solve the Scandoubler/Flickerfixer problem with a VGA monitor.  Does anyone know of a guide or know how to alter the A2320 to fit inside the A4000D case?

Thanks,

Jeremy

[adz]

IIRC it isn't advisable to use a A2320 Amber board with an A4000, AGA and Amber don't go well together.

[Tahoe]

It will work, you just won't get AGA resolutions, only ECS.
Don't think you phisically have to modify it to fit.
Making it work with AGA is a nono, that's not going to work, ever.

[Erol]

buy an external scan doubler.. far easier..

[Tahoe]

Or go for this one:

http://cgi.ebay.nl/ws/eBayISAPI.dll?ViewItem&category=8142&item=5171070710&rd=1

[caliban_6]

Thanks for that link,

I was looking for a scandoubler for days, and all the shops are sold out.  I thought I was doing a complete EBay scan but apparently I was not.

Hopefully the owner understands English and will send it to the US ...


Thanks again,


Jeremy

[Jope]

- make sure you don't run any high refresh modes (super#?, multiscan, productivity..), as the amber board will attempt to double them to something too high..
- AGA colours will show up incorrectly
- remove the bracket from the end of the card and it should fit inside the A4000

[Tahoe]

caliban_6 wrote:

Hopefully the owner understands English and will send it to the US ...

If not, let me know, you can always order it through me; i'll send it along.