Welcome, Guest. Please login or register.

Author Topic: Could this device make it "cheap" and easy to connect a VGA monitor on an Amiga?  (Read 5313 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline JimS

  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 1155
    • Show only replies by JimS
Re: Could this device make it "cheap" and easy to connect a VGA monitor on an Amiga?
« Reply #14 from previous page: January 14, 2005, 04:04:27 AM »
I did find an RGB to component circuit on the web a few weeks ago. It didn't seem too difficult. Like you say, some resistors and op-amps.
Obsolescence is futile. You will be emulated. - Amigus of Borg
 


Offline shayes1981

  • Newbie
  • *
  • Join Date: Dec 2004
  • Posts: 34
    • Show only replies by shayes1981
    • http://www.mullerpipeorgan.com
Definitely looks like it should work, especially if that VGA port isn't just a pass through.  That rigging up of stuff is what made the Amiga the Amiga, but sometimes you just want to make stuff work without hacking cables together :)  (Though if there really isn't any other way of doing it - give me the cables and I'll start hacking!)



 

Offline adolescent

  • Hero Member
  • *****
  • Join Date: Sep 2003
  • Posts: 3056
    • Show only replies by adolescent
All I can say is you get what you pay for.  Don't expect great results out of a $40 scan doubler.  If you want a good RGB -> S-Video encoder you're looking at $100 minimum.  ~$200 for a quality scan doubler like the Micomsoft XRGB-2.

Time to move on.  Bye Amiga.org.  :(
 

Offline shayes1981

  • Newbie
  • *
  • Join Date: Dec 2004
  • Posts: 34
    • Show only replies by shayes1981
    • http://www.mullerpipeorgan.com
Probably true :)  However, I bet it's better than looking at an A500 hooked up through an RF modulator to a B&W TV!

That's how my Dad used his C64 for years, then he thought he had a brain tumor from using it, and looking at it on a bad screen.  He finally figured it out, and in 1984, he bought a 1702 monitor - which is sitting behind me right now hooked up to my VCR, and still makes a great tv!
 

Offline JimS

  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 1155
    • Show only replies by JimS
Quote

shayes1981 wrote:
Definitely looks like it should work, especially if that VGA port isn't just a pass through.  


If you go to the manufacturer's site, you'll see that the VGA port is a passthru, so you don't have to disconnect cables when switching between your peecee and the game or whatever other source. Too bad. You could use this on an amiga with composite, or s-video. For RGB you'll have to build something.

BTW, on the manufacturer's site they have an interesting little gizmo.... it lets you use a gameboy advance as a composite monitor.... now that's cool.

Obsolescence is futile. You will be emulated. - Amigus of Borg
 

Offline Srdjan

  • Newbie
  • *
  • Join Date: May 2004
  • Posts: 24
    • Show only replies by Srdjan
- I have it at home , i tried to use it with my Amiga 1200,
the picture was very low quality ......
 

Offline FastRobPlus

  • Sr. Member
  • ****
  • Join Date: Oct 2003
  • Posts: 392
    • Show only replies by FastRobPlus
    • http://bye
Quote

Srdjan wrote:
- I have it at home , i tried to use it with my Amiga 1200,
the picture was very low quality ......


Was that with the 1200's composite output?