Enforcer & PPC

[chkamiga]

I Have now a BPPC Cart running. When i start Enforcer
the Amiga freeze. Maybe its a Problem with the Flash-Rom
Adress. In the Enforcer Manuel stands that a Adress $F00000
should not used by a Hardware-Card. The Flash Adress is in
the near - $F00C38

Can i do something, so that Enforcer work?
Or have i to use another Tool for this?
I have Tried that from the Blizzard Install Disk Cyber...
that dont crash but dont report me the Hits.

Sorry for my bad English

[itix]

You must use CyberGuard. You had to enable something somewhere, cant remember what.

[chkamiga]

In the Manuel stand i should start Segtracker
and than Cyberguard, but there is no
hit Displayed.
I have Use the LawBreaker and a Programm
that Reads from $0.
No Con-Output, no File Output.

[Framiga]

Hi

Enforcer doesn't works with a 060 (sometimes disabling CPU caches).

Use Cyberguard-CON.info or "Cyberguard-Sashimi.info + Sashimi"

Bye

PS- start SegTracker (put it in C:) first in the Startup-sequence after SetPatch

[chkamiga]

>Enforcer doesn't works with a 060
>(sometimes disabling CPU caches).

Enforcer works perfektly with my Blizzard1260.

>Use Cyberguard-CON.info or
>"Cyberguard-Sashimi.info + Sashimi"

i try it.

>PS- start SegTracker (put it in C:) first
>in the Startup-sequence after SetPatch

Can i dont do this before i start Cyberguard?
I dont want this in my Startsequence

[chkamiga]

Cyberquard_RAWIO works. Seems that was a Tooltype
Problem, each Icon have other.

Thanks