Welcome, Guest. Please login or register.

Author Topic: ? - Overheat the monitor  (Read 1107 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline SidViciousTopic starter

  • Full Member
  • ***
  • Join Date: Jun 2004
  • Posts: 164
    • Show only replies by SidVicious
? - Overheat the monitor
« on: September 08, 2004, 01:18:50 AM »
Is it a good idea to place the monitor like this:


----------------------------
|  mmmmmmmmmmmmmmmmmmmmmm  |
|  mmmmmmmmmmmmmmmmmmmmmm  |
|  mmmmmmmmmmmmmmmmmmmmmm  |
|  mmmmmmmmmmmmmmmmmmmmmm  |
|  mmmmmmmmmmmmmmmmmmmmmm  |
|  mmmmmmmmmmmmmmmmmmmmmm  |
|  mmmmmmmmmmmmmmmmmmmmmm  |
|  mmmmmmmmmmmmmmmmmmmmmm  |
|  mmmmmmmmmmmmmmmmmmmmmm  |
----------------------------

All the M is is the monitor...the | and - around is the wooden planks around. It's around 1-2cm around the hole monitor (and on the back too). It's rather cold in the room itself, but it's feels like the monitor is gettin' rather hot fast. It's a PHILIPS CM8833-II monitor.
Is it a big risk that it's getting overheated or is it only computer that's can get overheated fast and easily?
 

Offline minator

  • Hero Member
  • *****
  • Join Date: Jan 2003
  • Posts: 592
    • Show only replies by minator
    • http://www.blachford.info
Re: ? - Overheat the monitor
« Reply #1 on: September 08, 2004, 01:51:46 AM »
Quote
Is it a big risk that it's getting overheated or is it only computer that's can get overheated fast and easily?


There are ventilation holes in the casing for a reason you know!

Monitors put off quite a surprising amount of heat, Computers just put off more (and it's increasing) so need fans to assist the cooling.

Drilling a load of holes for ventilation in the wood should help.
 

Offline anakirob

  • Full Member
  • ***
  • Join Date: Aug 2004
  • Posts: 176
    • Show only replies by anakirob
    • http://www.systemofsound.org/
Re: ? - Overheat the monitor
« Reply #2 on: September 08, 2004, 02:34:16 AM »
Years ago my old C=1084 (or something, y'know the standard C= monitor) had an intermittent fault, where it would just black out and make a funny smell.

Guess what the problem was...
Yup. I had inadequate ventilation. :-?

Offline Plaz

Re: ? - Overheat the monitor
« Reply #3 on: September 08, 2004, 04:13:15 AM »
Electronic parts in any monitor are sensitive to heat,
especially the capacitors and transistors. Excessive heat
will normally shorten their life. An older average 14-15"
monitor puts out about as much heat as a 90-100watt light
bulb. Newer monitors are less. Some flat panels heat up,
but they use different components that take the heat
better. Capacitors contain an oil based liquid. Heat will
help dry these out in time. Once that happenes, problems
begin and eventully cause the parts to fail or burn up
completly. If you put your hand on the top of the monitor
and the temperature is uncomfortably high, it's probably
too hot and needs more ventilation. If it's just warm,
you're probally ok. But generally the cooler the better.

Plaz
 

Offline TjLaZer

Re: ? - Overheat the monitor
« Reply #4 on: September 08, 2004, 05:39:33 AM »
I had a Commodore 1960 monitor that would intermitently arch.  Well it arched out and burnt out last year for good.  Made a hugh POP! sound.  Piece of crap.  Well it did last 10 years so no complaints I guess.  I have another 1960 and it is running great so far, no problems so this may last...

I would not block any opening at all.  Not worth it.
Going Bananas over AMIGAs since 1987...

Looking for Fusion Fourty PNG ROMs V3.4?

:flame: :banana: :banana: :banana: