Welcome, Guest. Please login or register.

Author Topic: Zorro2/3 spec  (Read 1752 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline ruffneckTopic starter

  • Full Member
  • ***
  • Join Date: Jun 2002
  • Posts: 101
    • Show only replies by ruffneck
Zorro2/3 spec
« on: February 07, 2003, 03:33:34 AM »
Where i can find some info about Zorro slots technical information? Z2 and Z3 clock freq in mhz, data transfer rates etc?
 

Offline zipper

Re: Zorro2/3 spec
« Reply #1 on: February 07, 2003, 08:14:10 AM »
At least ZIII from http://www.thule.no/haynie/
 

Offline iamaboringperson

  • Hero Member
  • *****
  • Join Date: Jun 2002
  • Posts: 5744
    • Show only replies by iamaboringperson
Re: Zorro2/3 spec
« Reply #2 on: February 07, 2003, 08:55:33 PM »
the official source of zorro info is:
AMIGA Hardware Reference Manual

published by AW

ISBN 0-201-56776-8

quite good it is...
 

Offline Xand

  • Sr. Member
  • ****
  • Join Date: Feb 2002
  • Posts: 391
    • Show only replies by Xand
Re: Zorro2/3 spec
« Reply #3 on: February 07, 2003, 11:13:19 PM »
I don't have it here with me so I can't check, but I believe that the ROM Kernel Reference Guides are all available on the 2.1 Developer's CD.
SunBlade 1000 2x1200mhz UltraSparc III+, 8GB RAM, XVR1000, 73GB and 300GB FC drives, DVD, SunPCi IIIpro - 1GB RAM (yes it does work when I set the clock back to 2009), Solaris 10.

Ultra60 2x450MHz UltraSPARC II, 2GB RAM, 9GB U160 and 36GB U320 drives, CDROM
 
A1200T, 603e-240mhz/040-50mhz SCSI, 256mb, MediatorSX, Voodoo3-3000, Soundblaster 128, 10/100 Ethernet, other stuff OS3.9
 

Offline iamaboringperson

  • Hero Member
  • *****
  • Join Date: Jun 2002
  • Posts: 5744
    • Show only replies by iamaboringperson
Re: Zorro2/3 spec
« Reply #4 on: February 07, 2003, 11:21:01 PM »
im not sure that the hardware book is on there though...