Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: 1 [2]   Go Down

Author Topic: Amiga Walker case (yes another one!)  (Read 4198 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Oldsmobile_Mike

Re: Amiga Walker case (yes another one!)
« Reply #14 from previous page: August 14, 2013, 05:56:43 PM »
Quote from: JuvUK;744569
design, machining, welding and cutting time, very approx - 25 to 30 hours, going rate about £45 an hour so £1350 ish.


Yeesh.  £45 an hour?  I am in the wrong line of work!  ;)
Logged
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos
 

Offline odin

  • Colonization had Galleons
  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 6796
    • Show only replies by odin
Re: Amiga Walker case (yes another one!)
« Reply #15 on: August 14, 2013, 07:34:22 PM »
How much d'ya think you cost your boss? At least double what you're earning, then double that to answer the question what your boss is charging his/her customers for an hour of your work ;).
Logged
 

Offline JuvUKTopic starter

  • Full Member
  • ***
  • Join Date: Apr 2005
  • Posts: 243
    • Show only replies by JuvUK
    • http://www.bobhoughtonferrari.co.uk
Re: Amiga Walker case (yes another one!)
« Reply #16 on: August 20, 2013, 08:41:04 AM »
yay it is finally finished and fully working :)
Logged
Why does it always break?
 

Offline Duce

  • Off to greener pastures
  • Hero Member
  • *****
  • Join Date: Jul 2009
  • Posts: 1699
    • Show only replies by Duce
    • http://amigabbs.blogspot.com/
Re: Amiga Walker case (yes another one!)
« Reply #17 on: August 20, 2013, 10:25:32 AM »
Very nice stuff!  When I did mine, I made it out of steel and she was a bugger to get all straight and true, heh.  But I'm not a big fan of welding aluminum, and I chose to make the taller Walker prototype model.

If you get a chance, make sure to share any technical drawings you did pre-fab on the case!
Logged
 

Offline Brian

  • Hero Member
  • *****
  • Join Date: Mar 2003
  • Posts: 1604
    • Show only replies by Brian
    • http://www.syntaxsociety.se
Re: Amiga Walker case (yes another one!)
« Reply #18 on: August 20, 2013, 10:32:52 AM »
Hated the design when it was first show but would love to have one of these now... with Classic Amiga hardware. I'm thinking an A1200 with ACA123x and a Walker 3.2 ROM (or custom A1200 ROM with Walker ROM components) would be close to the original.
Logged
 
Pages: 1 [2]   Go Up
« previous next »