Screen resolution on games

[ZeeRuX]

Hi there.. Got a question.. Im running Classic WB 3 on my Amiga 1200 with 64 extra ram on a 28" swedish fat tv. Dunno if its 60 or 50hz in Sweden but the Classic WB is running its resolution on the whole tv. .. BUT.. When I try a game, like Bubble Bobble, it changes the resolution so the pictures is very small... Its just like its pressed 5 inches from each side and 10 inches from the bottom so the picutes is centered at the top.. Is there any way to get the game-resolution to get over the whole screen? I can get a new tv if thats the problem.. I use the yellow connector to my tv with red and white to the audio. A bit annoing to have a 28" tv but only get like 17" when playing a game :hammer:

[ZeeRuX]

Ok.. But my 28" fat screen tv doesnt have any stretch mode lol. Any way I can fix it without this stretching? Cause I have tried several resolutions on my WB but it doesnt matter, the game will be the same small picture.. :afro:

[ZeeRuX]

Ok. Thx. But no.. My tv is ooooold .. No 16:9 mode.. And the yellow wire goes into a scartadapter to my tv.. But I can try with different connections but doubt that it will help. I had a 20" before and then there was a bigger picture cause then the picture didnt get smaller on the side.. Just on the hight.. I think it will have to be something with NTSC/PAL that makes the game change the resolution.. I shall try connect the Amiga to a flat screen and see what happens..

[ZeeRuX]

Dont know the resolution.. Can check it when I get home. But no, the WB looks just fine.. Really fine.

[ZeeRuX]

Here is how I ment.. It was only Dynablaster that was ****ed up in the resolution.. Every other game looses the bottom as the picture shows. I have tried both with the big fat 28" tv above and a brand new Philips 47" flatscreen.. Both tvs gets the same picture.. Its a bit shame that I cant get the game to go over the whole screen... :confused:

[ZeeRuX]

Thx for all answers... Then I know.. I can live with it =) Will try that with WHDLoad..