« on: March 28, 2011, 11:03:44 PM »
Hi
Old hd gets hot and start to give read/write errors after about 5 minits of use.
I've working HP D4963A hd and I thought to replace old hd with it.
It is 4260mb hd, will that make a problem? It also has a jumpers, should I do smething with them? Old didn't had any jumpers or any of them hasn't been use.
New HD:
Currently 8 and 9 are in use
1. Spare ID bit3
2. ID bit 2
3. ID bit 1
4. ID bit 0
5. Disable / Auto spin
6. SCSI term ON
7. Disable unit ATTN
8. TI Sync NEGO ** currently in use
9. Auto start delay ** currently in use
10. Delay start
11. Disable parity
12. led out
Should I remove connections from 8 and 9? What else?
Logged
ACube Sam 440ep Flex 800mhz, 1gb ram and 240gb hd and OS4.1FE
A1200 Micronic tower, OS3.9, Apollo 060 66mhz, xPert Merlin, Delfina Lite and Micronic Scandy, 500Gb hd, 66mb ram, DVD-burner and WLAN.
A1200 desktop, OS3.9, Blizzard 060 66mhz, 66mb ram, Ide Fix Express with 160Gb HD and WLAN
A500 OS2.1, GVP+HD8 with 4mb ram, 1mb chip ram and 4gb HD
Commodore CDTV KS3.1, 1mb chip, 4mb fast ram and IDE HD
