Author Topic: My medconfig/warp 3d report (Read 7638 times)

Gav · « **on:** October 14, 2007, 04:43:15 AM »

Hi
Ok i think i now have Warpup installed correctly because i can now get earth 2140 to run pretty good.
Now when i try to start the shogo demo the game trys to scan renderers and then i get a ppc exception error and the same happens when i try the warp 3d gears ppc demo.

Now when i first installed warp3d from the mediator cd for some reason it seems to install the A3000/4000 warp3d files so i had to remove them and copy the files i needed manually.

Now i wasn't sure if i needed the no mmu files?or the mmu files so here is my medconfig report so hopefully someone can spot the problem.

*** Envarc: variable settings: ***

MMU = No, previous setting: No

NoCache = Yes, previous setting: Yes

Emulation = No, previous setting: No

PatchInt = No, previous setting: No

VoodooMem = 8, previous setting: 8

VoodooInt = Yes, previous setting: Yes

Warp3D = Yes, previous setting: Yes

VirgeMem = Not Set, previous setting: Not Set

VirgeInt = Not Set, previous setting: Not Set

Gfxaddr = 0, previous setting: 0

Memsize = Not Set, previous setting: Not Set

FastEthernet = 0, previous setting: 0

tv.prefs file name = PixelView PlayTV pro, previous setting: PixelView PlayTV pro

Tuner = Not Set, previous setting: Not Set

Background = RED=170 GREEN=170 BLUE=170, previous setting: RED=170 GREEN=170 BLUE=170

*** Mediator System Files versions: ***

pci.library - ver.5.9 (8420 bytes)
PciInfo - ver.1.2 (8088 bytes)
MediatorNET.device - ver.2.6 (5996 bytes)
Voodoo.card - ver.4.18 (15260 bytes)
Virge.card - ver.1.7 (11936 bytes)
Vendors.txt - ver. info N/A (156149 bytes)
MedConfig - ver.1.3 (94013 bytes)

*** Mediator Multimedia CD Files versions: ***

FastEthernet.device - ver.1.7 (6676 bytes)
mixer.library - ver.1.4 (3572 bytes)
fm801.audio - file N/A
FM801 - file N/A
sb128.audio - ver.4.7 (6344 bytes)
SB128 - ver. info N/A (2032 bytes)
SBMixer - ver.1.3 (1928 bytes)
tv.library - ver.1.13 (8224 bytes)
TV - ver.1.3 (1956 bytes)
tv.vhi - file N/A

*** Spider Files versions: ***

poseidon.library - file N/A
spider.device - file N/A
DriveSpeed - file N/A

*** Warp 3D files versions: ***

Warp3D.library - ver.4.2 (67648 bytes)
Warp3DPPC.library - ver.4.2 (101020 bytes)

*** Warp 3D for A3/4000 files versions: ***

W3D_Picasso96.library - file N/A
W3D_Picasso96_PPC.library - file N/A
W3D_AvengerBE.library - file N/A
W3D_AvengerBE_PPC.library - file N/A
W3D_AvengerLE.library - file N/A
W3D_AvengerLE_PPC.library - file N/A

*** MMU Warp 3D for A1200 files versions: ***

W3D_Picasso96MU.library - file N/A
W3D_AvengerBEMU.library - file N/A
W3D_AvengerLEMU.library - file N/A

*** NO_MMU Warp 3D for A1200 files versions: ***

W3D_Picasso96M.library - ver.4.2 (12780 bytes)
W3D_Picasso96M_PPC.library - ver.1.0 (35292 bytes)
W3D_AvengerBEM.library - ver.4.2 (535304 bytes)
W3D_AvengerBEM_PPC.library - ver.4.2 (443516 bytes)
W3D_AvengerLEM.library - ver.4.2 (535388 bytes)
W3D_AvengerLEM_PPC.library - ver.4.2 (411612 bytes)

*** Other files versions: ***

AmigaOS ROM Update - ver.44.26 (127956 bytes)
rtg.library - ver.40.3945 (216548 bytes)
emulation.library - ver.40.389 (39652 bytes)
Picasso96API.library - ver.2.300 (24520 bytes)
ahi.device - ver.5.6 (58416 bytes)
68040.library - ver.43.0 (692 bytes)
68060.library - ver.46.15 (103596 bytes)
warp.library - ver.5.1 (21288 bytes)
ppc.library - ver.0.9 (70148 bytes)

model - , gfx - , zorro - , pcmcia - ,
serial - , ppc - , mmu030 - , mmulib - ,
nocache - , emulation - , warp3d - , pci - .

startup-sequence:

BPPCFix INSTALL >NIL:
C:CheckLMB
IF WARN
SYS:Prefs/ATA3Prefs
ENDIF
C:ATA3.driver QUIET
C:CheckLMB
IF WARN
SYS:Prefs/ATA3Prefs
ENDIF
C:ATA3.driver QUIET
; $VER: Startup-Sequence_HardDrive 45.2 (19.1.2001)
; Startup-Sequence for AmigaOS 3.9

If EXISTS C:SquirrelSCSI
C:SquirrelSCSI
EndIf

Set SCSIUpdate 1
Set SCSIUpdate 0
EndIf
If EXISTS SYS:Expansion/XSurfIDE
Set SCSIUpdate 0
EndIf
If EXISTS SYS:Prefs/Env-Archive/NOSCSIUPDATE
Set SCSIUpdate 0
EndIf
If $SCSIUpdate EQ 1
SetPatch QUIET
Else
SetPatch SKIPROMUPDATES "scsi.device" QUIET
EndIf
Unset SCSIUpdate

C:Version >NIL:
C:AddBuffers >NIL: DF0: 15
FailAt 21

C:MakeDir RAM:T RAM:Clipboards RAM:ENV RAM:ENV/Sys
C:Copy >NIL: ENVARC: RAM:ENV ALL NOREQ

Resident >NIL: C:Assign PURE
Resident >NIL: C:Execute PURE

Assign >NIL: ENV: RAM:ENV
Assign >NIL: T: RAM:T
Assign >NIL: CLIPS: RAM:Clipboards
Assign >NIL: REXX: S:
Assign >NIL: PRINTERS: DEVS:Printers
Assign >NIL: KEYMAPS: DEVS:Keymaps
Assign >NIL: LOCALE: SYS:Locale
Assign >NIL: LIBS: SYS:Classes ADD
Assign >NIL: HELP: LOCALE:Help DEFER

BindDrivers
C:Mount >NIL: DEVS:DOSDrivers/~(#?.info)

C:LoadMonDrvs

SetEnv Language "english"
SetEnv Workbench $Workbench
SetEnv Kickstart $Kickstart
UnSet Workbench
UnSet Kickstart

C:AddDataTypes REFRESH QUIET
C:IPrefs
C:ConClip

Path >NIL: RAM: C: SYS:Utilities SYS:Rexxc SYS:System S: SYS:Prefs SYS:WBStartup SYS:Tools SYS:Tools/Commodities

SYS:System/REXXMast >NIL:

IF EXISTS S:User-Startup
Execute S:User-Startup
EndIF

Resident Execute REMOVE
Resident Assign REMOVE

C:LoadWB
EndCLI >NIL:

PciInfo report:

Pci Device 1:
VendorID: $121a
VendorName: 3dfx Interactive Inc
DeviceID: $5
DeviceName: Voodoo3 All Voodoo3 chips, 3000
ClassCode: $30000
RevisionID: $1
InterruptPin: 1
SubsystemVendorID: $121a
SubsystemID: $57
MemSpace0: $80000000 - $81ffffff
MemSpace1: $82000000 - $83ffffff
IOSpace2: $eb6000 - $eb60ff
RomSpace: $84000000 - $8400ffff

Pci Device 2:
VendorID: $1274
VendorName: Ensoniq
DeviceID: $1371
DeviceName: ES1371 AudioPCI
ClassCode: $40100
RevisionID: $6
InterruptPin: 3
SubsystemVendorID: $1274
SubsystemID: $1371
IOSpace0: $eb6400 - $eb643f

Pci Device 3:
VendorID: $109e
VendorName: Brooktree Corporation
DeviceID: $36e
DeviceName: Bt878 MediaStream Controller
ClassCode: $40000
RevisionID: $11
InterruptPin: 4
SubsystemVendorID: $70
SubsystemID: $13eb
MemSpace0: $84010000 - $84010fff

Pci Device 4:
VendorID: $109e
VendorName: Brooktree Corporation
DeviceID: $878
DeviceName: Bt878 Video Capture (Audio Section)
ClassCode: $48000
RevisionID: $11
InterruptPin: 4
SubsystemVendorID: $70
SubsystemID: $13eb
MemSpace0: $84011000 - $84011fff

Pci Device 5:
VendorID: $10ec
VendorName: Realtek Semiconductor
DeviceID: $8139
DeviceName: RT8139A/B/C Fast Ethernet Adapter
ClassCode: $20000
RevisionID: $10
InterruptPin: 1
SubsystemVendorID: $10ec
SubsystemID: $8139
IOSpace0: $eb6800 - $eb68ff
MemSpace1: $84012000 - $840120ff

ShowConfig report:

PROCESSOR: CPU 68060/68060fpu/68060mmu
CUSTOM CHIPS: AA PAL Alice (id=$0023), AA Lisa (id=$00F8)
VERS: Kickstart version 40.68, Exec version 40.10, Disk version 45.2
RAM: Node type $A, Attributes $505 (FAST), at $60000000-$6BF7FFFF (191.5 meg)
Node type $A, Attributes $703 (CHIP), at $1000-$1FFFFF (~2.0 meg)
BOARDS:
Board (Index Information Ltd): Prod=2206/40($89E/$28) (@$EA0000 128K)
Board (Index Information Ltd): Prod=2206/168($89E/$A8) (@$200000 8meg)
Board + ROM (HD?) (phase 5): Prod=8512/110($2140/$6E) (@$F00C34 128K)

Gav · « **Reply #1 on:** October 14, 2007, 05:28:22 PM »

Anyone?

Gav · « **Reply #2 on:** October 14, 2007, 08:54:58 PM »

Yeah it's pretty annoying really as from what i can see it seems ok?and if earth2140 works fine then my warpup must be installed correct so the problem must be with Warp3D.

Gav · « **Reply #3 on:** October 14, 2007, 11:45:01 PM »

Set what variables exactly?what should i change??I currently un-checked the No patch box aswell as switching termintor 2 to Terminator 0.

Can someone not upload there medconfig report or something so that i can compare there warp3d libs and what not as this is driving me insane and no one seems to have an answer.

Surely there are more people who are running a mediator/Bppc with warpos and warp3D.

Gav · « **Reply #4 on:** October 15, 2007, 02:57:04 AM »

Thanks for the reply,just tried terminator 1 and gears ppc demo still reports a exception error.

Gav · « **Reply #5 on:** October 16, 2007, 11:36:36 PM »

This to much argh lol,so i tried the ppc memtest program and everything came back as ok.
My warpos must be all working good since Earth 2140 runs fine,i really dislike Warp3D i mean it installs the damn 3/4000 version for some weird reason.

With all these seperate programs doing all these diffrent things its very hard to pinpoint the probelm.
Very frustrating indeed,the 68k gears demo used to work but now it wont either same goes for the warptest aswell.

Gav · « **Reply #6 on:** October 17, 2007, 12:09:01 AM »

Hmm,are all these libs supposed to be in my picasso96 drawer in libs?

Virge.card
Voodoo.card
rtg.library
fastlayers.library
emulation.library
S3VIRGE.chip
CVision3D.card

Gav · « **Reply #7 on:** October 17, 2007, 03:26:38 AM »

:-?

Gav · « **Reply #8 on:** March 03, 2008, 03:36:47 PM »

Hi
Right just been using my amiga again after a having a break from it and i still aint got ward3d sorted.

Now after looking at Nasty's post above i checked out my "0s3.9/envarchive/powerpc" folder.
In my folder i only have one script file which is named "force" and is set to 1..

Why do i only have one file in there??What do i need to do to correct this??
Thanks in advance.

Gav · « **Reply #9 on:** March 03, 2008, 03:44:32 PM »

Duh!!!
I forgot to check show all files lol my bad.

Gav · « **Reply #10 on:** March 03, 2008, 03:49:22 PM »

Right well from what i see all is correct so far as i checked through those files above and everything seems fine apart from Nasty's vodoo mem is set to 15?Mine is set to 8..

Gav · « **Reply #11 on:** March 03, 2008, 05:16:03 PM »

Thanks for the reply,i just tried the older version of warpup but again i get the same damn exception message..This is so frustrating...

Gav · « **Reply #12 on:** March 03, 2008, 06:05:17 PM »

I have tried this sooo many times that i truly am out of ideas,i have re-installed warpup,warp3d and still no joy...

Do all warp3d drivers work or do you have to use the ones from the mediator cd??
Thanks

Gav · « **Reply #13 on:** March 03, 2008, 07:48:01 PM »

@Framiga
I installed that powerpc lib but that has changed nothing,also checked the flash mem and all is fine.

@MadMatt

Here is my current medconfig report.

*** Envarc: variable settings: ***

MMU = No, previous setting: No

NoCache = Yes, previous setting: Yes

Emulation = No, previous setting: No

PatchInt = No, previous setting: No

VoodooMem = 8, previous setting: 8

VoodooInt = Yes, previous setting: Yes

Warp3D = No, previous setting: No

VirgeMem = Not Set, previous setting: Not Set

VirgeInt = Not Set, previous setting: Not Set

Gfxaddr = $200000, previous setting: $200000

Memsize = 7, previous setting: 7

FastEthernet = 0, previous setting: 0

tv.prefs file name = PixelView PlayTV pro, previous setting: PixelView PlayTV pro

Tuner = Not Set, previous setting: Not Set

Background = RED=170 GREEN=170 BLUE=170, previous setting: RED=170 GREEN=170 BLUE=170

*** Mediator System Files versions: ***

pci.library - ver.5.9 (8420 bytes)
PciInfo - ver.1.2 (8088 bytes)
MediatorNET.device - ver.2.6 (5996 bytes)
Voodoo.card - ver.4.18 (15260 bytes)
Virge.card - ver.1.7 (11936 bytes)
Vendors.txt - ver. info N/A (156149 bytes)
MedConfig - ver.1.3 (94013 bytes)

*** Mediator Multimedia CD Files versions: ***

FastEthernet.device - ver.1.7 (6676 bytes)
mixer.library - ver.1.4 (3572 bytes)
fm801.audio - file N/A
FM801 - file N/A
sb128.audio - ver.4.7 (6344 bytes)
SB128 - ver. info N/A (2032 bytes)
SBMixer - ver.1.3 (1928 bytes)
tv.library - ver.1.13 (8224 bytes)
TV - ver.1.3 (1956 bytes)
tv.vhi - file N/A

*** Spider Files versions: ***

poseidon.library - file N/A
spider.device - file N/A
DriveSpeed - file N/A

*** Warp 3D files versions: ***

Warp3D.library - ver.4.2 (67648 bytes)
Warp3DPPC.library - ver.4.2 (101020 bytes)

*** Warp 3D for A3/4000 files versions: ***

W3D_Picasso96.library - file N/A
W3D_Picasso96_PPC.library - file N/A
W3D_AvengerBE.library - file N/A
W3D_AvengerBE_PPC.library - file N/A
W3D_AvengerLE.library - file N/A
W3D_AvengerLE_PPC.library - file N/A

*** MMU Warp 3D for A1200 files versions: ***

W3D_Picasso96MU.library - file N/A
W3D_AvengerBEMU.library - file N/A
W3D_AvengerLEMU.library - file N/A

*** NO_MMU Warp 3D for A1200 files versions: ***

W3D_Picasso96M.library - ver.4.2 (12780 bytes)
W3D_Picasso96M_PPC.library - ver.1.0 (35292 bytes)
W3D_AvengerBEM.library - ver.4.2 (535304 bytes)
W3D_AvengerBEM_PPC.library - ver.4.2 (443516 bytes)
W3D_AvengerLEM.library - ver.4.2 (535388 bytes)
W3D_AvengerLEM_PPC.library - ver.4.2 (411612 bytes)

*** Other files versions: ***

AmigaOS ROM Update - ver.44.26 (127956 bytes)
rtg.library - ver.40.3945 (216548 bytes)
emulation.library - ver.40.389 (39652 bytes)
Picasso96API.library - ver.2.300 (24520 bytes)
ahi.device - ver.5.6 (58416 bytes)
68040.library - ver.43.0 (692 bytes)
68060.library - ver.46.15 (103596 bytes)
warp.library - ver.4.0 (21252 bytes)
ppc.library - ver.0.9 (70148 bytes)

model - 0, gfx - 2, zorro - 1, pcmcia - 1,
serial - 0, ppc - 0, mmu030 - 0, mmulib - 1,
nocache - , emulation - 1, warp3d - , pci - 1.

startup-sequence:

BPPCFix INSTALL >NIL:
C:CheckLMB
IF WARN
SYS:Prefs/ATA3Prefs
ENDIF
C:ATA3.driver QUIET
C:CheckLMB
IF WARN
SYS:Prefs/ATA3Prefs
ENDIF
C:ATA3.driver QUIET
; $VER: Startup-Sequence_HardDrive 45.2 (19.1.2001)
; Startup-Sequence for AmigaOS 3.9

If EXISTS C:SquirrelSCSI
C:SquirrelSCSI
EndIf

Set SCSIUpdate 1
Set SCSIUpdate 0
EndIf
If EXISTS SYS:Expansion/XSurfIDE
Set SCSIUpdate 0
EndIf
If EXISTS SYS:Prefs/Env-Archive/NOSCSIUPDATE
Set SCSIUpdate 0
EndIf
If $SCSIUpdate EQ 1
SetPatch QUIET
Else
SetPatch SKIPROMUPDATES "scsi.device" QUIET
EndIf
Unset SCSIUpdate

C:Version >NIL:
C:AddBuffers >NIL: DF0: 15
FailAt 21

C:MakeDir RAM:T RAM:Clipboards RAM:ENV RAM:ENV/Sys
C:Copy >NIL: ENVARC: RAM:ENV ALL NOREQ

Resident >NIL: C:Assign PURE
Resident >NIL: C:Execute PURE

Assign >NIL: ENV: RAM:ENV
Assign >NIL: T: RAM:T
Assign >NIL: CLIPS: RAM:Clipboards
Assign >NIL: REXX: S:
Assign >NIL: PRINTERS: DEVS:Printers
Assign >NIL: KEYMAPS: DEVS:Keymaps
Assign >NIL: LOCALE: SYS:Locale
Assign >NIL: LIBS: SYS:Classes ADD
Assign >NIL: HELP: LOCALE:Help DEFER

BindDrivers
C:Mount >NIL: DEVS:DOSDrivers/~(#?.info)

C:LoadMonDrvs

SetEnv Language "english"
SetEnv Workbench $Workbench
SetEnv Kickstart $Kickstart
UnSet Workbench
UnSet Kickstart

C:AddDataTypes REFRESH QUIET
C:IPrefs
C:ConClip

Path >NIL: RAM: C: SYS:Utilities SYS:Rexxc SYS:System S: SYS:Prefs SYS:WBStartup SYS:Tools SYS:Tools/Commodities

SYS:System/REXXMast >NIL:

IF EXISTS S:User-Startup
Execute S:User-Startup
EndIF

Resident Execute REMOVE
Resident Assign REMOVE

C:LoadWB
EndCLI >NIL:
run >NIL: Birdie ?
PciInfo report:

Pci Device 1:
VendorID: $121a
VendorName: 3dfx Interactive Inc
DeviceID: $5
DeviceName: Voodoo3 All Voodoo3 chips, 3000
ClassCode: $30000
RevisionID: $1
InterruptPin: 1
SubsystemVendorID: $121a
SubsystemID: $57
MemSpace0: $80000000 - $81ffffff
MemSpace1: $82000000 - $83ffffff
IOSpace2: $eb6000 - $eb60ff
RomSpace: $84000000 - $8400ffff

Pci Device 2:
VendorID: $1274
VendorName: Ensoniq
DeviceID: $1371
DeviceName: ES1371 AudioPCI
ClassCode: $40100
RevisionID: $6
InterruptPin: 3
SubsystemVendorID: $1274
SubsystemID: $1371
IOSpace0: $eb6400 - $eb643f

Pci Device 3:
VendorID: $109e
VendorName: Brooktree Corporation
DeviceID: $36e
DeviceName: Bt878 MediaStream Controller
ClassCode: $40000
RevisionID: $11
InterruptPin: 4
SubsystemVendorID: $70
SubsystemID: $13eb
MemSpace0: $84010000 - $84010fff

Pci Device 4:
VendorID: $109e
VendorName: Brooktree Corporation
DeviceID: $878
DeviceName: Bt878 Video Capture (Audio Section)
ClassCode: $48000
RevisionID: $11
InterruptPin: 4
SubsystemVendorID: $70
SubsystemID: $13eb
MemSpace0: $84011000 - $84011fff

Pci Device 5:
VendorID: $10ec
VendorName: Realtek Semiconductor
DeviceID: $8139
DeviceName: RT8139A/B/C Fast Ethernet Adapter
ClassCode: $20000
RevisionID: $10
InterruptPin: 1
SubsystemVendorID: $10ec
SubsystemID: $8139
IOSpace0: $eb6800 - $eb68ff
MemSpace1: $84012000 - $840120ff

ShowConfig report:

PROCESSOR: CPU 68060/68060fpu/68060mmu
CUSTOM CHIPS: AA PAL Alice (id=$0023), AA Lisa (id=$00F8)
VERS: Kickstart version 40.68, Exec version 40.10, Disk version 45.2
RAM: Node type $A, Attributes $505 (FAST), at $60000000-$6BF7FFFF (191.5 meg)
Node type $A, Attributes $703 (CHIP), at $1000-$1FFFFF (~2.0 meg)
BOARDS:
Board (Index Information Ltd): Prod=2206/40($89E/$28) (@$EA0000 128K)
Board (Index Information Ltd): Prod=2206/168($89E/$A8) (@$200000 8meg)
Board + ROM (HD?) (phase 5): Prod=8512/110($2140/$6E) (@$F00C34 128K)

Gav · « **Reply #14 on:** March 03, 2008, 08:11:29 PM »

Birdie prefs???It seems to work alright lol??

Author Topic: My medconfig/warp 3d report (Read 7638 times)

Gav

My medconfig/warp 3d report

Gav

Re: My medconfig/warp 3d report

Gav

Re: My medconfig/warp 3d report

Gav

Re: My medconfig/warp 3d report

Gav

Re: My medconfig/warp 3d report

Gav

Re: My medconfig/warp 3d report

Gav

Re: My medconfig/warp 3d report

Gav

Re: My medconfig/warp 3d report

Gav

Re: My medconfig/warp 3d report

Gav

Re: My medconfig/warp 3d report

Gav

Re: My medconfig/warp 3d report

Gav

Re: My medconfig/warp 3d report

Gav

Re: My medconfig/warp 3d report

Gav

Re: My medconfig/warp 3d report

Gav

Re: My medconfig/warp 3d report