Hi there... Yeah, sorry for the lack of info... Ehm, let me see...
I'm connecting them directly to one another...
The cable is brand new and I used it at at a netparty some month ago, and it haven't been touched since (Until now)...
So you say I should use a "crossover" cable for this solution? -My guess is, if I used it at the netparty, were it was connected to some device (switch or router) it must be a standard cable...
So this could be no.1 error...
I've already given the two amiga's two different IP's: #1= 192.168.1.1 and #2= 192.168.1.2 the SubNet(Netmask) is= 255.255.255.0, but my gateway's is different (I've read that if none of the amigas is connected to the internet only #2 should have #1's IP as gateway and #1 should have none (priority=0); This could be wrong?)...
I'm also confused about the settings in MiamiDX:
What should I write in the database section (on both machines) in the following options?:
Hosts
Users
Groups
If I've understood this right, these are the only things I need to configure in the database section?
In the TCP/IP section I've sat the atributes for each specific amiga: different hostnames, real names and user names...
In short:
will you say it's either the cable or the gateways?
Again thanks...
