Upgraed A3000 with Ramsey7, Dmac04 and Buster 11.. don't boot now?!

[redrumloa]

Did you really think someone was going to sell you a working DMAC -04?

Don't be an ass.

[redrumloa]

OK, I did the test...  Installed the Ramsey 07 with SuperDmac02.. machine boots! SuperDmac04 with Ramsey 04, no boot.. so it looks like the dead one is the SuperDmac04, my god! :-(
 
I guess I'll have to talk to red about this. Unless the SuperDmac04 won't work with the Ramsey 04...
 
:-(

This DMAC -04 chip was pulled from a working A3000T, so it is a but concerning. I am also a bit concerned that this may be the same machine that the Deneb USB sold many months ago on the way back to me for warranty replacement was installed in?

[redrumloa]

Hi RED, Folkz....
 
ISSUE SOLVED!
 
After reviewing the chip very carefully, it turns out that one of the chip's pins was slightly bent... and making contact to another one causing probably a short circuit! i fixed that little problem using a flat screwdriver very carefully, reinserted the chip in the socket, started the machine again and voila!!!!!!!! It works now!
 
Awesome!
 
Now I've got an A3000 with Ramsey7, SuperDmac 04, Superbuster 11 and WBD -00-8 :-D
 
Thanks everybody.
 
Cheers
 
Dragster

 Very good to hear