PICO PSU is playing tricks...

[TheGoose]

I have been working with a Pico120 PSU project and I now notice that it only likes to come on when I have something connected to the molex connector. For instance, When I have the multimeter connected to the molex, measuring the 5+V, I click the atx power switch, and all comes to life.

If I remove the multimeter leads, I click the switch, nada. Is it sensing power? Drain? Hmmm, is Pico watching me?

:confused:

[TheGoose]

Yeah, both solid thoughts. I'll do some more checks tonight. And check that sound is working right too...

[TheGoose]

Something must be missing. More testing and I have found that the audio is messed up. This is a tell tale sign that it is not getting -12 ? is that right? I will send pic of solder hook up...

[TheGoose]

I suspect that drinking and soldering might be the problem here?

Well the computer has been drinking, not me, not me.  :lol:

I fixed one issue yesterday and then I remember, oh this old MB I wasn't using... was not in use for a reason! ; it's was busted to begin with Duhhh.

And I'm going to blame that on the early collapse of my memory abilities.

No where'd I put that A3000 .....

[TheGoose]

Ok, I was able to hook up the Pico to another known to be good A1200 and it worked just fine, no problems. So, the other motherboard had problems for certain.

Too bad, cause the only thing wrong with it seems to be the audio. HD, PCMCIA, video, lyra 2 keyboard all worked.

It is old though. It's a rev 2B, a real Commodore built MB. I bet it can be fixed...