Os 2.1

[C64er]

Hello all,
I have a noob stupid question for the day! :rtfm:

I have setup an Amiga A500 in my game room with OS 2.1, it's seems to work fine but I had an issue with scsi.device not being installed. This came up when I tried to hook up a ZIP 100 drive the OS could not find it, or any drive other than the boot disk. I know about termination and device setup, so that was not the issue.

On my A2000 with OS 3.1, scsi.device is there and the ZIP drive shows right up in HDTools.

I finally installed a set of ZIP tools and it works now, so my question is, do I need to install OS2.05 then 2.1 (since it's an upgrade) to install the missing scsi.device or am I just a total noob? :biglaugh:

Thanks, Dan

[C64er]

Scsi.device is in rom, it doesn't came with os

Was thinking that.
So is there a 2.x ROM that does not have scsi.device? When I type version scsi.device on the 500 it returns it's not installed or present.

Everything works fine on the 500, just this one anomaly.

[C64er]

As far as I'm aware, most 2.x Roms do not have scsi.device in them, some of the Roms for the 600 starting including this for the 600s onboard IDE. Chances are if you're running a 500 it might have 2.04 Roms which wouldn't have scsi.device present.

Robert.

Wow good info, thanks.
I should have added some more info. The 500 is docked into a Bodega Bay, and I'm using a DataFlyer Plus (scsi\ide), I can't get the card to recognize any scsi device except for the boot drive, using either the internal cable or the external pass through connector. Now Sysinfo sees it fine, just not the DataFlyer drivers.

I don't have the manual so there may be a jumper set incorrectly or I may not even have the right drivers, I found them with a Google search and it got me going with the boot drive.

My A2000 has 3.1 ROM and OS3.1 and uses a GVP scsi adapter.

[C64er]

You can see my Amiga's and my C128D on my web page:
http://www.n8ie.com/c64er/