Hi all,
Does anybody in the UK want to try X10 with the Amiga software mentioned above ? I now have:
One CM12u including a 9 pin serial lead. I believe this is the European version of the CM11, but I can't prove that (But see below).
Four AM12 appliance modules (With code wheels)
One Domia appliance module (No code wheels)
Two LM12 lamp modules (With code wheels)
Four Domia lamp modules (No code wheels)
One LM15EB "Socket rocket" plugs into a BC lamp connector and the bulb plugs into it.
FYI:
1. Appliance modules are on/off switches with internal relays, and lamp modules are dimmers for incandescent bulbs.
2. I presently use a CM12u with Homeseer HS3, where it is set as "CM11A compatible".
These X10 devices were working properly when removed from my other property. I'm sure there must be a couple more modules, as I can't find the rf to X10 modules, which allow you to use X10 rf remote controls. I will have a dig around.
I have the option of selling this kit on Ebay (after testing it) where I would be asking around £10 per device, or, if there is any interest on this forum, I will sell it without testing for a low price.
Is anybody interested ?
