Just my luck now where to find parts for A1200?

[haywirepc]

I have been back to amiga with a dedicated amiga emulation pc and aros for awhile now. I finally had a chance to get an amiga 1200, having been drooling over alot of classic amiga hardware for some time.
 
So some time ago, I planned on buying an indivision, a pcmcia network card, and a hard drive with os3.9 pre-installed from amigakit.
 
The 1200 I have has a 50mhz 68030 accellerator with 32 megs ram.
 
There is no network card, scandoubler or hard drive/cd-rom.
 
So now I check amigakit and none of those items I just looked at literally a few weeks ago are available... Does anyone know of anyplace else I can get these parts together quickly?

If you have any of these items in used but working condition and would like to help, please pm me, otherwise some sources for these parts and items would be so greatly appreciated. Any scandoubler that will let me do 1024x768 256 colors, any pcmcia network card that will work, and anyone with a 2.5 inch ide or cf card solution with os3.9 pre-installed...
 
Right now I'm a little frustrated,I'm stock with a pretty much stock a1200, no way to get files to and from her, no hard drive, and an old 1084, which is fine for games but not so good for everything else.
 
Please help me get this miggy upgraded and back to use!
 
Steven

[haywirepc]

I do see they offer a 2.5 inch hard drive and can preinstall it with os3.9 for an extra fee, they are apparently out of the pcmcia network card and indivision a1200 scandoubler.
 
I would prefer a regular network wired deal not wireless.
 
I did email them, and I also emailed Joe at Softwarehut as well. Hopefully I can find this stuff, just very anxious to get her going!
 
I think I will just put her away for awhile while I scour for parts, its torture right now having her sit there next to my pc.
 
Any more suggestions for parts or upgrades, especially if your selling something I'm all ears.
 
The other thing I was thinking about is that internet on even the 50mhz 30 will be pretty painful, so maybe I'd be better off just using a cf card to transfer files or getting a catweasel. Any thoughts on this if you've done so?
 
Thanks!
 
Steven

[haywirepc]

Sean,
 
I'm so thankful to have this don't worry about the rest I'll find the parts.
 
Btw everyone, Sean was awesome enough to donate this amiga1200 and accellerator and ram to the cause.  What a great guy!
 
Found 3.1 kick roms, ordering tonight. Found cf card to ide adapter with a cf card preinstalled with os3.1/amigasys aga. Ordering tonight.
 
Now what I really need is just the scandoubler. Sean, I'd love to tower this guy, I will work on that full tower case I told you about and see what I can do about that, but I thought it would first be best to get hard drive/ file transfers and hopefully internet working.
 
Cammy,
 
I didn't even think about using the pcmcia port on the 1200 to transfer files...

If I get the multi reader, will that show up on workbench as a drive when I plug in a cf card into that? I didn't think of that great solution/idea for getting files to it from my windows pc... I have a newer hp windows pc that has a multi card reader right on the front, I know it works for my camera memory card but never used it for anything else...
 
carvedeye, I don't have the towering kit yet but I'm hoping to bribe Sean for one very soon, if you want to sell me your video card, pm me I'd be happy to get it, wouldn't that allow 1024x768x16 bit? I guess if I'm going to go rtg, I'd prefer the best res/colors possible.
 
Thanks for everyones help and support, especially Sean's. He also got me obsessed with looking at morph os screenshots, and I think I see a mac mini in my near future, but first I need to get this 1200 rocking.
 
Thanks all,
 
Steven

[haywirepc]

I Forgot!

Thanks a bunch gulliver, I will be ordering two cables and two of those cards... I have no way to transfer files right now but I'll get something going so I can get the drivers on the 1200.
 
Looks like this a1200 will be coming together soon. Can't wait for all these parts to get here and get this baby going! Thanks again all!

Steven

[haywirepc]

Yes not sure I want to make it a tower, but thats a possibility in the future, for now I just want to keep in in its beautiful case with alot of extra love jammed inside.
 
Gulliver, yes please tel me where I can get a good external scandoubler... There will not be indivisions available until may or june I'm told. I'd like to get anything for now and buy that later. I can always use the 60$ external scandoubler for a 500 or other amiga.
 
Please pm me or post a source for that external scandoubler, I'd like to order it right away...
 
Steven

[haywirepc]

That seems like a strange way to do it and I'm surprised it looks so good being converted twice like that. Looks really good in the pictures though, very clear.
 
I think this will work for my needs.
 
Lots of great info here thanks to everyone for their help, I think I can get the proper parts and upgrades now.
 
Steven

[haywirepc]

Gulliver, thanks for the info on the scandoubling. I have ordered both items you showed, so I guess its rgb to svideo, svideo to vga, hopefully it will look as good as it does in those pics for me!
 
Also thanks to gulliver, I have ordered the pcmcia network card he showed, thanks gulliver!
 
Next up, I went to a friends house today to trade an older pc I have for a beautiful WHITE colored 17 inch lcd, its beautiful and will be perfect for this project. So it may take 3 weeks for these parts to arrive from australia and hong kong, but my video problems will be solved.... I'm so happy about that!
 
My ancient 1084 will be packed away or used with my next project, upgrading a stock amiga 500 I have.
 
Nlandas, I am going to get a this cf device that amigakit sells,So those cards would come in handy, I have sent you a pm will glady pay for postage. Those cards would be great for me for transferring files...
 
Next up, I am ordering the pcmcia easy adf thing,amiga 1200 3.1 roms, and a 40 gig 2.5 inch hard drive pre-installed with os3.9 from amigakit.
Just waiting to hear back that they have a 40 gig in stock, otherwise, I may end up with a 100 gig drive, which is probably overkill... I have to say amigakit has been great answering questions and providing great service, I highly reccomend them and will use them for future needs.
 
My sincere thanks for everyone's help, looks like I found all the parts I need for now.
Now comes the terrible wait to play with my new toys...
 
Steven