Welcome, Guest. Please login or register.

Author Topic: Buddha Flash Phoenix Edition For All Zorro Amigas  (Read 1559 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline mdv2000Topic starter

  • Full Member
  • ***
  • Join Date: Mar 2009
  • Posts: 169
    • Show all replies
Buddha Flash Phoenix Edition For All Zorro Amigas
« on: March 26, 2009, 12:01:43 AM »
Has anyone used one of
these with an Amiga 2000?

 I am thinking of getting one from AmigaKit so I can use an IDE hard drive on my A2000 - but I have a revision 4.5 board and wonder if anyone seen any problems.

Thanks,
Mike Valverde
---------------------------------
"Only AMIGA makes it possible!"

A2000HD +A2630+ w/8MB+500MB SCSI HD
 + Buddha IDE + 1.3 and 3.1 ROM (WB 3.1)
 

Offline mdv2000Topic starter

  • Full Member
  • ***
  • Join Date: Mar 2009
  • Posts: 169
    • Show all replies
Re: Buddha Flash Phoenix Edition For All Zorro Amigas
« Reply #1 on: March 26, 2009, 01:28:43 PM »
Thanks Quarkx for the info.

I too haven't been able to find anything about this card and feared as much.  Currently I run 1.3 with SCSI 50 MB drive and it boots to Workbench in about 10 seconds.  Granted a new OS increases what it has to load... but 3 minutes just to recognize a CDROM is crazy!

Unless I hear some success stories I am going to stay away and try to figure out how to add more storage via my SCSI card.

Thanks,
Mike Valverde
---------------------------------
"Only AMIGA makes it possible!"

A2000HD +A2630+ w/8MB+500MB SCSI HD
 + Buddha IDE + 1.3 and 3.1 ROM (WB 3.1)