« on: September 27, 2003, 07:14:38 AM »
I once had the same problem.
You have to put the ZorroIII cards before the ZorroII cards...that means the first Slot is that one nearest the RAM-Banks..
If only one ZorroIII card is installed and not recognized..then your Buster is probably faulty
Also make sure your cards are working :-)
Logged
A4000D CS060/MKII with SCSI, CV64/4MB, 128MB Fast, ACARD AEC-7720U SCSI-IDE,80GB Samsung HDD, Yamaha CDRW, XSurf2, OS3.9BB2
A500,1MB Chip Kick1.3/3.1,GVP A500+ 540MB HDD and 8MB Fast,GVP DSS 8Bit Sampler
