Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: PCMCIA CF Adaptor  (Read 1865 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline tribzTopic starter

  • Full Member
  • ***
  • Join Date: Sep 2008
  • Posts: 220
    • Show all replies
PCMCIA CF Adaptor
« on: November 11, 2008, 08:49:35 PM »
Received a CF adaptor kit from Amigakit today but it doesnt seem to recognise the CF cards I have. I have 3 x 4GB Kingston cards, one used internally via a CF-IDE adaptor and that works fine. I plan to use the other 2 with the PCMCIA adaptor. I've formatted them on my PC to 4GB FAT (not fat32). Is the 4GB fat size to big to be seen properly?

Thanks,
tribz
Logged
 

Offline tribzTopic starter

  • Full Member
  • ***
  • Join Date: Sep 2008
  • Posts: 220
    • Show all replies
Re: PCMCIA CF Adaptor
« Reply #1 on: November 11, 2008, 09:08:40 PM »
Quote

MozzerFan wrote:
Do you have fat95 installed?

Edit: And do you have compactflash.device installed?


Yes. Ran the installation disk that it came with. You can also boot from it. It has copied fat95 and compactflash.device and a few other things to hard disk. The 4GB isnt recognised either when using the bootable floppy or when booting from HD. CF0: is mounted but says no disk in device.

Just had a look at the fat95 readme and it says partitions up to 4GB so looks like size isnt the problem.
Logged
 

Offline tribzTopic starter

  • Full Member
  • ***
  • Join Date: Sep 2008
  • Posts: 220
    • Show all replies
Re: PCMCIA CF Adaptor
« Reply #2 on: November 11, 2008, 09:54:43 PM »
Quote

MozzerFan wrote:
Do you have any other CF card to test it with? Some people reported problems with certain brands.


Fraid not, just these 2 x Kingston. I could buy a test one but am a bit loathed to before exploring other options.

Thanks,
tribz
Logged
 

Offline tribzTopic starter

  • Full Member
  • ***
  • Join Date: Sep 2008
  • Posts: 220
    • Show all replies
Re: PCMCIA CF Adaptor
« Reply #3 on: November 11, 2008, 10:03:02 PM »
Quote

motorollin wrote:
You mentioned that your CF cards work internally, so I'm guessing they're formatted with an RDB and partitioned with Amiga filesystems. That won't work with the mountlist installed by the installer disk, which uses fat95 instead of Amiga filesystems. You need to make sure the CF card you are using with the adapter is formatted as FAT, not with an Amiga filesystem.

--
moto


Hi moto, only one been used internally. The other 2 I started using today from new but they've never been formatted in an amiga, only fat formatted in a PC
Logged
 

Offline tribzTopic starter

  • Full Member
  • ***
  • Join Date: Sep 2008
  • Posts: 220
    • Show all replies
Re: PCMCIA CF Adaptor
« Reply #4 on: November 11, 2008, 10:49:58 PM »
Quote

amigakit wrote:
The older Kingston cards work fine on the Amiga. However recently Kingston changed the specification and the newer cards (with the flower logo) have compatiblity problems with Amigas.  This is why we offer tested CF cards with the kit.


Bugger, I have the ones with the flower. Might give you a bell tomorrow to order one. Thanks everyone else for the replies.
Logged
 

Offline tribzTopic starter

  • Full Member
  • ***
  • Join Date: Sep 2008
  • Posts: 220
    • Show all replies
Re: PCMCIA CF Adaptor
« Reply #5 on: November 12, 2008, 01:57:29 PM »
Got a working one today ...

Link

SanDisk Ultra® II CompactFlash®4GB

Even works when formatted to FAT32
Logged
 
Pages: [1]   Go Up
« previous next »