Graphics card compatibility X1000

[F0LLETT]

Means your new card is not that powerful and does not require the extra power. It will run without it.

[F0LLETT]

Here is all I get on serial - after this, the machine locks up and I have to switch off the power. But once I replace the RX card with my existing Radeon HD, the X1000 boots as normal:

Code: [Select]

�[HELO][DRAM]SDRAM: ECC off, Non-ECC DIMM used on channel 0.
[RELO][L1CF][GOLO][GOT ][ZBSS][INIT][MAIN][KMEM][EXCP][CONS][CIOK][AREN][PCIH][PCIB][HELO][DRAM]SDRAM: ECC o.
[RELO][L1CF][GOLO][GOT ][ZBSS][INIT][MAIN][KMEM][EXCP][CONS][CIOK][AREN][PCIH][PCIB][PCIS][DEVI]
Does anyone know what's going on?
Steve

Is your CFE set to auto boot OS4?
As I recall something about compatility with newer cards in CFE.
Been like 13 years since I touched an X1000. So cant be sure. I also do not have the CFE source code.