Indivision ECS - Pulling my hair out

[F0LLETT]

Have you tried the new ECS config tool which is available from Individual Computers web site.
If your current tool shows no indivision, then its the old version that doesnt work with the new batch of ECS Indivisions.

Interesting read

http://www.amibay.com/showthread.php?t=31249

http://www.amibay.com/showthread.php?t=32216

Will assume this is the fix they did but I still get the same result as before. So thinking it's still the Indivsion ECS.

Thats correct.
As I said its very odd, as I was seeing your issue. I then applied mod and then it was perfect.

I have done the same mod to about 10 Indivisions so far. You are the only one that has said your still having issues.

[F0LLETT]

hi, i've bought just 2 days ago my ECS indivision from a famous web site in germany (!) and it don't work: after the logo about the "great hardware", i get yellow screen (or sometimes red screen) and a600 hangs.
I've noticed a strange fix in the board, i've never seen before on the net, as in the picture attached.... the vendor said it's normal, it's a fix made from the productor, but......
Is only on mine?
Thank you!

Thats fine, its the fix.

[F0LLETT]

I say it's the Indivision ECS, same fault yet worse now since getting it back, now I have to have a Denise chip in the Indivision ECS for the mouse to be able to move.

Remove the Indivision ECS and the A500 is very stable, can't fault it. So big finger pointing back to the Indivision ECS.

Wish I bought from the first batch :-)

You using it without denise? You have to have denise installed.
Only the A600 doesnt need denise.

[F0LLETT]

Currently has the denise installed.

So the mouse is not working, even with denise installed?
As far as I remember it needs denise for certain things on everything except the A600.