4000D Rev. D Cr and GVP 4060DT

[wlemonds]

The motherboard works with the A3640 but I can't get it to work with the 4060. On either CPU jumper setting.

The motherboard doesn't have the CPU, FPU and 50 Mhz Oscillating crystal at U104.

If I installed the crystal would the 4060 work then?

Thanks!

[wlemonds]

I have a Rev. B motherboard and it works with it, as it has the oscillator soldered on.

Reading http://amiga.resource.cx/mod/a4000.html says,

"no socket is provided for the 50 MHz oscillator which is required when installing an asynchronous processor board in place of the A3640"

So, am I right in thinking if I soldered a socket and installed the 50 MHz oscillator the 4060 should work?