[LOOKING FOR] Amiga 1000 JU-363-03 floppy drive button.

[flaviosr]

Hi to All,

I have found an Amiga 1000 that was supposed to be not working... but she is!!!
She is an "old" NTSC Amiga... I have changed the accu and now she is back to life again!
The old accu is out of duty and anyway for 110V market so not easy to use in EU... I tested it with an inverter but it is really out.

Now I would like to restore her to full beauty but she is missing:
° the eject button for JU-363-03 floppy drive;
° the 2 logos on the upper left side;
° the "Commodore" on the down left side.

I am also looking for a "complete" Amiga 1000 disk drive to fullfilll an empty A1010 box.

Thank you for your help.

[flaviosr]

I have seen some photos over internet WITHOUT the "Commodore" and, your are right, the Amiga seems more... professional...
Anyway I need a big amount of look at least for the button!

[flaviosr]

Well... I didn't knew that US Amiga and EU Amiga were different from outside! Are they?
I "want" to use the Amiga without an inverter, and that's why I mounted an EU A1000 PSU (and also since the original PSU is dead!)... but I do not want to change anything else... :-o Only restore the Amiga to the original look!

About the 3D printing... I was thinking about it but I did not though things are so beyond! Thanx... but the one you sent is not the right button... I think it's for A1200 or A500... more common Amigas...
I am going to investigate.
And I have seen that you can ORDER the piece!!!