Welcome, Guest. Please login or register.

Author Topic: Cybervision 64/3d on Amiga 2000  (Read 3462 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline jonarvidTopic starter

  • Newbie
  • *
  • Join Date: Oct 2006
  • Posts: 3
    • Show all replies
Cybervision 64/3d on Amiga 2000
« on: October 30, 2006, 12:15:24 PM »
Hi, I just got a CyberVision 64/3D from Softhut. I'm using it on an Amiga 2000 w/2630 accelerator. I have installed the CybergrapixV4 software. I use it together with a HP L1902 LCD monitor. But no matter which resolution I try, I don't get output to my LCD monitor. The monitor works perfect with the Indvision Scandoubler from Softhut.
I don't get any errors either. What do I do wrong?


regards,
Jon
 

Offline jonarvidTopic starter

  • Newbie
  • *
  • Join Date: Oct 2006
  • Posts: 3
    • Show all replies
Re: Cybervision 64/3d on Amiga 2000
« Reply #1 on: October 30, 2006, 02:54:02 PM »
Thanks for a lot of good suggestions. My config is:
Kickstart 3.1
C=2630 w/4MB 030,882
then from first Z2 slot:
Cybervision 64/3D
Buddha Flash Gold Edition
X-Surf3
KickflashOS4

Is the enforcer software inlcuded in the CyberGFX4 package?
regards,
Jon
 

Offline jonarvidTopic starter

  • Newbie
  • *
  • Join Date: Oct 2006
  • Posts: 3
    • Show all replies
Re: Cybervision 64/3d on Amiga 2000
« Reply #2 on: October 30, 2006, 04:28:34 PM »
Just got it working after putting the Enforcer in Startup-Sequence below SetPatch. Working good.
Thanks for all help.

Another question:
Should I buy Amiga3000 or Amiga4000?

regards,
Jon