New Xsurf2 not working?

[Ancalimon]

I bought an X-Surf2 and i took it from the customs in Turkey 2 days ago.

I plugged the card in one of my A4000T`s two remaining Z3 slots and istalled the software.

i started xsurf test program and it gives and error about some 16 bit memory. If something`s wrong with the card a friend would be able to fix it. What could be the problem?

when i choose x-surf.device as ethernet device in miami or miamidx and click query device, mouse freezes for 5 secs and tells cant open x-surf.device,0

This is xsurftest result

6.Ram Disk:> xsurftest
xsurf testprg V1.2 (13.12.1999)

Searching for xsurf card (VEN_ID=4626, PROD_ID=23)....found
Board address = 0xe90000

ISA Plug and Pray [ähm] Play setup...
No PnP card found!

Searching for RTL8019 at 0x300...found!
Testing 16bit memory...PIOWriteMem Timeout!
false!
written:
[48] [65] [6c] [6c] [6f] [20] [48] [65] [72] [65] [20] [49] [73] [20] [41] [6d]
[69] [67] [61] [20] [53] [70] [65] [61] [6b] [69] [6e] [67] [20] [21] [21] [21]
reading:
[48] [65] [6c] [6c] [6e] [20] [48] [65] [72] [65] [20] [49] [72] [20] [40] [6d]
[68] [67] [60] [20] [52] [70] [64] [61] [6a] [69] [6e] [67] [20] [21] [20] [21]

[Ancalimon]

I just tried the mni driver and it didnt give any errors when i clicked on device query it changed the settings after i clicked device query.

i dont have any cable connected to it now. This wek i`ll buy a hub and connect the machine to pc using that hub. hub will be connected to cable modem (not yet bought)

[Ancalimon]

Pfff

The card is faulty im not sending it back to Germany as it would cost too much.

How will I fix it? Is the only problem with its onboard cache?

xsurftest program should have an output like this: according to http://batman.jypoly.fi/~saku/lehti/online/33/osastot/testit/x-surf.html

xsurf testprg V1.2 (13.12.1999)
Searching for xsurf card (VEN_ID=4626, PROD_ID=23)....found
Board address = 0xe90000
ISA Plug and Pray [ähm] Play setup...
01-CARD VendorID = 0x19808c4a SerNr=0x19b733 CRC==x52
Setup PNP card...
Searching for RTL8019 at 0x300...found!
Testing 16bit memory...ok!
Ethernet address = 52:54:40:25:89:e4
Chip is in PnP mode
Chip is using half-duplex mode
Chip is using IOBase something (0x3) and IRQ 2/9