Minimig BOM List for Digikey

[AJCopland]

Ah the old threads are the best, anyway, here's my slightly revised list, revised because PCC101CGCT-ND was labelled as PCC470CGCT-ND which might have caused some confusion:

Code: [Select]

(Part #)           (Description)                (Units) (Price/Unit)
122-1519-ND        (IC SPARTAN-3 FPGA)             x 1   25.45
706-1048-ND        (IC SRAM 8MB)                   x 2   11.25
MC68SEC000AA16-ND  (IC CPU)                        x 1   13.39
PIC18LF252-I/SP-ND (IC PIC)                        x 1   9.70
AE9828-ND          (IC Socket for PIC)             x 1   1.14
296-8326-5-ND      (IC 74HC4060)                   x 1   0.56
ICL3232ECV-16Z-ND  (IC DL RS232 3-5.5V 16TSSOP)    x 1   3.42
LM1117MP-ADJCT-ND  (IC Regulator)                  x 3   1.31

P833-ND            (Cap 100uf 16V elect)           x 4   0.15
P819-ND            (Cap 22uF 35V elect)            x 1   0.15
399-3195-1-ND      (Cap Tant 100uf 6.3V)           x 4   0.93
PCC1840CT-ND       (Cap .1UF *100nf 50V 0805)      x 3   0.87 (10/pack)
PCC103BNCT-ND      (Cap 10000pf *10nf 50V 0805)    x 3   0.41 (10/pack)
PCC220CNCT-ND      (Cap 22pf 50V 0805)             x 1   0.69 (10/pack)
PCC470CGCT-ND      (Cap 47pf 50V 0805)             x 1   0.49 (10/pack)
PCC101CGCT-ND      (Cap 100pf 50V 0805)            x 1   0.49 (10/pack)

160-1579-1-ND      (Led Blue)                      x 1   0.40
160-1196-1-ND      (Led Red)                       x 1   0.22
160-1414-1-ND      (Led Green)                     x 1   0.12
BAV99FSCT-ND       (Diode Sot23)                   x 5   0.13

535-9046-ND        (Crystal 20.000MHZ)             x 1   0.39
300-8473-ND        (Crystal 4.33619MHZ)            x 1   0.70

311-1.00MCRCT-ND   (RES 1.00M OHM 1/8W 1% 0805)    x 1   0.80 (10/pack)
311-560CRCT-ND     (RES 560 OHM 1/8W 1% 0805)      x 1   0.80 (10/pack)
311-1.00KCRCT-ND   (RES 1.00K OHM 1/8W 1% 0805)    x 1   0.80 (10/pack)
311-270CRCT-ND     (RES 270 OHM 1/8W 1% 0805)      x 3   0.80 (10/pack)
311-100CRCT-ND     (RES 100 OHM 1/8W 1% 0805)      x 1   0.80 (10/pack)
311-180CRCT-ND     (RES 180 OHM 1/8W 1% 0805)      x 1   0.80 (10/pack)
311-2.20KCRCT-ND   (RES 2.20K OHM 1/8W 1% 0805)    x 1   0.80 (10/pack)
311-4.70KCRCT-ND   (RES 4.70K OHM 1/8W 1% 0805)    x 1   0.80 (10/pack)

CP-102AH-ND        (CONN Power Jack)               x 1   0.42
CP-4060-ND         (CONN MINI-DIN 6POS FEMALE)     x 2   1.11
A35120-ND          (CONN VGA DSUB HD 15POS)        x 1   1.81 (US Only)
A35107-ND          (CONN Serial 9Pin)              x 2   0.86 (US Only)
S5800-40-ND        (CONN HEADER 40POS 1x40)        x 1   1.33
^^^^^ Cut this connector to needed sizes
CP-3524NG-ND       (CONN 3.5MM RT ANGLE Audio)     x 1   0.78
361-1025-1-ND      (CONN MULTIMEDIA CARD PUSHPULL) x 1   2.57 (US Only)
P8008S-ND          (Switch 6MM LT-TOUCH 160GF)     x 3   0.29

I'm buying parts here in the UK now that I've been paid. It looks like FGPA and SRAM should be in quite soon, around about the 9th december. However the LEDs and a whole bunch of other parts are on back order until the END of JANUARY 2008.

Also some of those parts from the original list are US only. I haven't checked the US site yet to see about shipping.

The sub-total for 2x the above list (as i'm buying for two MiniMigs) is £92.78

Andy

[AJCopland]

Good to know for next time. Luckily that's one part I don't need to worry about as my friend (myself and a friend are building these) has a samples account with them so has got our PICs for free :-D

Andy

[AJCopland]

MiniMorph wrote:
I am sure you all know but with the Core Ported to the Altera DE1 (150 USD) there is less need build your own FPGA board.

Ah yes but the building of our own is, for me, something of a dream having seen everything from Dennis' first post through to the open sourcing of the whole design. I want to hold one that I've built in my own hands... and then play Syndicate on it :-D

Plus by doing it ourselves we can have a constantly evolving hardware platform that is truly our own. Hence why I'm spending more time learning to use gEDA than I am with my shiny new GeForce 8800GT that arrived the other day!! :S I want to make something great into something better that others can benefit from!

We, the amiga community, are what is great about what remains of the amiga. So know _we_ get to make of this MiniMig what we want of the Amiga.

Andy

[AJCopland]

Good of you to post taht Colin, I need one of those as well