Welcome, Guest. Please login or register.

Author Topic: RocTec: RocHard 800C  (Read 2363 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline 1NOM155

  • Full Member
  • ***
  • Join Date: Jul 2006
  • Posts: 184
    • Show all replies
Re: RocTec: RocHard 800C
« on: September 17, 2007, 03:24:31 PM »
can you take a picture on the rear switch (inside the box), the wires and below the board wear the wires connect???

i may have a clue...
3 x Amiga 500 REV. 6A, ROM 1,3 v34.5 (1991) (All Working)
1 x Amiga 600 REV. 1.5, ROM 2,05 v37.300 (1991) (Stand-by for install a Toshiba HDD2718, 2167MB)
----------------
WTB Amiga 1200 or  Amiga 3000 D & T or 4000 D & T.
Any one to sell to Europe?
 

Offline 1NOM155

  • Full Member
  • ***
  • Join Date: Jul 2006
  • Posts: 184
    • Show all replies
Re: RocTec: RocHard 800C
« Reply #1 on: September 18, 2007, 01:43:15 AM »
Quote

sy278 wrote:
Will do will post them later on, at work just now.



any luck?
3 x Amiga 500 REV. 6A, ROM 1,3 v34.5 (1991) (All Working)
1 x Amiga 600 REV. 1.5, ROM 2,05 v37.300 (1991) (Stand-by for install a Toshiba HDD2718, 2167MB)
----------------
WTB Amiga 1200 or  Amiga 3000 D & T or 4000 D & T.
Any one to sell to Europe?
 

Offline 1NOM155

  • Full Member
  • ***
  • Join Date: Jul 2006
  • Posts: 184
    • Show all replies
Re: RocTec: RocHard 800C
« Reply #2 on: September 18, 2007, 11:53:43 AM »
the "only memory", cant be, because they have a proper switch (the red ones)  :-D

Switch     Function
1    Enable / Disable Hard Drive
2    Enable / Disable RAM
3    Kickstart 1.2 / Kickstart 1.3
4    Reserved
5    Reserved
6    SCSI ID 0xx / 1xx
7    SCSI ID x0x / x1x
8    SCSI ID xx0 / xx1
3 x Amiga 500 REV. 6A, ROM 1,3 v34.5 (1991) (All Working)
1 x Amiga 600 REV. 1.5, ROM 2,05 v37.300 (1991) (Stand-by for install a Toshiba HDD2718, 2167MB)
----------------
WTB Amiga 1200 or  Amiga 3000 D & T or 4000 D & T.
Any one to sell to Europe?