MakeCD 3.2 problem

[bakoulis]

I have burn many cds, with various 030 Amigas to the past, with the makeCD 3.2 without problems. Last year I try to backup my HD to cds but the buffer (about 10MB) run quickly to empty. The result is not correctly writen cds. I upgrade to 040 from 030 but with same results! I try with image file and without image, with DAO or TAO but nothing. I use an idefix buffered adapter with a master 2.5 HD (8GB) and a master 3.5 combo DVD/CDRW BTC. Ofcourse I have install the idefix 97' software to support it. The crazy thing is that I have burn many cds with other amigas (A500 020/33mhz!!! & A1200T 030/50mhz) to the past without problems. Ideas? :-?
________
Youporn

[bakoulis]

Thomas wrote:
The IDEfix adapter is not the same as the two disjunctive IDE controllers on a PC motherboard. The IDEfix only allows one IDE controller to be switched between two cables. But you can access only one cable at a time. If you read the manual of the IDEfix adapter, you'll see that you should first fill the first channel with a master and a slave before you use the second channel to connect a third and fourth device.

To my case the first channel is for my 2.5 HD. I can't connect 2 HDs on it, the cable is short and have only 1 connector. The second channel have the 3.5 DVD/CDRW as master too.

________
IPAD CASES

[bakoulis]

pVC wrote:
When burning with image, does it make the image successfully first or will it stop there? Does the buffer underrun happen at same place always? Have you tried to write some other data? Is your HD badly fragmented? It could affect with that low spec system. Your CDRW doesn't have buffer underrun protection?

It create image to HD successfully. And the buffer goes to empty ever with same steps in a few secs. The rest you have wrote is not happened to my system.

________
CALA

[bakoulis]

[bakoulis]

I have tied the other port of adapter but don't worked at any combination (master or slave or CS). So, I have returned to other port and device unit 2.

What do you mean: "And there is still the "no concurrent reads and writes" option in MakeCD waiting to be tested." I hear for it first time.

________
230

[bakoulis]

I have tried everything but nothing....
I'll try a new clean install...and maybe works.

________
How to roll blunts

[bakoulis]

amije wrote:
@Boot_WB: in my setup i have set the speed at 1x but the prog writes by it's self from 6x to 8x...

I thing the biggest problem is the modern hardware (DVD/CDRW).
The modern combo drives have minimum write speed the 8x.
That is the problem I thing. The program try to write at this high speed for amiga specs and the buffer goes to empty very fast. Anybody writes at 8x with success to amiga1200 ide with makeCD? Anybody uses modern combo DVD/CDRW and writes CDs with lower speeds than 6x-8x with makeCD? If anybody make it please  let me know that.

________
Yamaha Sr500 Specifications

[bakoulis]

amije wrote:
i'm writing ok at 8x with a 52x32x52 cdrw. i'm using scsi.device and not atapi.device as i did in the past because i noticed that with scsi.device the cd can write at faster speeds. the cdrw is connected as slave at the standard ide port of a1200

What specs have your amiga? Mine have 040 blizzard but it fail to keep the buffer full.

________
Avandia class action

[bakoulis]

Framiga wrote:
"I use an idefix buffered adapter with a master 2.5 HD (8GB) and a master 3.5 combo DVD/CDRW BTC"

Have you already successfully used that BTC combo with other Amiga system or its new?

No I haven't successfully used that BTC to the past, is new to my system (I bought it from vesalia with an external cdrom case). To the past I used makecd with old drives like "Acer 2x CDR", Sony 8x CDRW" and "Toshiba 4x CDRW".

________
Ipad cases

[bakoulis]

[/quote]

a1200, bliz1260/50, 192mb ram, 60gb ibm hd, subway usb, 150w psu, pcmcia ethernet, cdrw lg 52x32x52, amiga os 3.9 bb2.
it was writing ok too in the past with 32mb ram, 4gb seagate hd, os 3.5, and cdrw sony 12x.[/quote]

I thing the 060 is enough for 8x writing but my 040 isn't.
Plus my 8GB 2.5 hd is only 4.200rpm.

________
Shemale Tube

[bakoulis]

Framiga wrote:

No I haven't successfully used that BTC to the past, is new to my system (I bought it from vesalia with an external cdrom case). To the past I used makecd with old drives like "Acer 2x CDR", Sony 8x CDRW" and "Toshiba 4x CDRW".

i think the problem is the BTC unit, unfortunately.

AFAIK BTC is a OEM producer and that devices rely very much on the power of the CPU where is working on. (see PCs)

My Teac (and probably your previous CD writers in some way) have 8 MB of data buffer/write proof and rely very well even with my old 040 CPU card (writing on the fly as well)

btw.... have you updated your "makecdromfs.module" recently?

The BTC is the problem is my opinion. What to you mean "makecdromfs.module"?

________
WELLBUTRIN WITHDRAW

[bakoulis]

makecd 32c update makecdromfs 45.12[/quote]

The update didn't help. Same story like before.

8a paro ena palio 4x patrida na ka8ariso!
 :pissed:
________
Best Buy Gift Cards