Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: GVP A2000 Rev 5 HC+8  (Read 2311 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Kin-HellTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2005
  • Posts: 624
    • Show all replies
GVP A2000 Rev 5 HC+8
« on: November 09, 2006, 05:53:28 AM »
Anyone know if this card can be made to work in an A4000/040 Buster 11 board?

GVP A2000 HC8+ Rev5

The GVP card has v3.07/ECD9 EVEN/256 on the ROM label.

Cheers
Logged
Getting 0lder is Mandatory..... Growing up is an option.
 

Offline Kin-HellTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2005
  • Posts: 624
    • Show all replies
Re: GVP A2000 Rev 5 HC+8
« Reply #1 on: November 09, 2006, 07:03:45 AM »
er...yeah...as above link!  ;-)
Logged
Getting 0lder is Mandatory..... Growing up is an option.
 

Offline Kin-HellTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2005
  • Posts: 624
    • Show all replies
Re: GVP A2000 Rev 5 HC+8
« Reply #2 on: November 09, 2006, 10:13:23 AM »
Quote

Sparky wrote:
hehe .. sorry brain had turned to fudge when I was reading it ... so yes it should work, I used one on my A4000 (with CSPPC CVPPC etc etc etc) ... worked a treat for the scanner.

Hmmm...Not for me it seems. If I leave the Auto Boot Jumper enabled, the miggy just sits there forever......
With the Boot jumper removed, the miggy boots from IDE okay, the card can be read by gvp info & the Ram configures okay with fast ram. GVP mem test shows no errors on the Memory, but I cant have the SCSI side of it working. Trying to run FastPrep Error messages with "Check Eprom Installed; BOOT Jumper on; BindDrivers"?

I'm wondering if the 4.15ROM flash would sort it?
Logged
Getting 0lder is Mandatory..... Growing up is an option.
 

Offline Kin-HellTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2005
  • Posts: 624
    • Show all replies
Re: GVP A2000 Rev 5 HC+8
« Reply #3 on: November 09, 2006, 04:52:05 PM »
Quote

Sparky wrote:
When you put the jumper on do you have a SCSI disk on board ?  Or an external SCSI disk ?

If not then I guess it's trying to find the boot block on an attached SCSI disk.

I never used it for disk myself, just used it for the scanner using the gvpscsi.device (I think .. use a sysinfo app that lists out the devices to be sure)

I also seem to remember there being a specific Hard Disk formating/configuration tool for it.

Sorry this is all coming from memory, not had an Amiga for a while now.

Good luck!


Yeah...the FastPrep utility & yes there is a drive hooked up with correct termination. Anyway, according to Amigis in Holland, I need at least version 4.5 of the Rom. I have D/L 4.15 but cant find 4.5 or later.
Can anyone mail me a Hex dump of the 4.5 or later FastROM please?
Amigis say they dont ship to the UK & there's summat about minimum order of 500 Euro's.
Google is not very friendly on results!  :-(
Logged
Getting 0lder is Mandatory..... Growing up is an option.
 

Offline Kin-HellTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2005
  • Posts: 624
    • Show all replies
Re: GVP A2000 Rev 5 HC+8
« Reply #4 on: November 10, 2006, 06:16:01 PM »
Thanks for your help fellas. I dropped Ralph Babel an Email & we're now sorted out with GVP BindDrivers 4.15 in the Expansion Drawer.

Thanks everyone.  :-)
Logged
Getting 0lder is Mandatory..... Growing up is an option.
 
Pages: [1]   Go Up
« previous next »