A2000 CD-ROM with A2091

[mechy]

Could you tell me how you got it to work please?

Just get ASIMcdfs 3.10 if possible, it will be your easiest,turn key install of a cd filesystem and will work with your combination fine.
you just need to know what device you have the cdrom set to during the install.

[mechy]

This is a very old thread, but AFAIR 7.0 was required to use devices with LUN's (like SCSI card readers).  Mechy or someone like that would know for sure.  

LUNs worked on older roms mostly,i think rev7 was bug fixes etc but its always good to have the latest roms. the 6.6 rom and up was pretty good. It does amaze me so many people are still using old buggy roms instead of upgrading, they are so cheap and or you can make your own eproms nearly free if you have the burner.

[mechy]

I have a burner, could you point me in the right direction please? :-)

try this for the 7.0roms:
eab.abime.net/attachment.php?attachmentid=16984&d=1214765066

makecd 3.2D is latest burning software i think, it can be found here:
http://www.estamos.de/makecd/

[mechy]

LUNs worked on older roms mostly,i think rev7 was bug fixes etc but its always good to have the latest roms. the 6.6 rom and up was pretty good. It does amaze me so many people are still using old buggy roms instead of upgrading, they are so cheap and or you can make your own eproms nearly free if you have the burner.

6.6 roms had no support for over 1GB partitions iirc,using sfs or pfs got around this.