cnet.device and amiTCp 4.0 demo Problem

[snoopdos]

Hi there,

at first please sorry my bad english
I have a big problem, i bought an PCMCIA Ethernetcard for my Amiga 1200.

Amiga is running with 68030/50 + 32MB Fastram (Blizzard 1230IV) Kick 3.0/Workbench 3.0 / 2.2GB 2.5"

I bought the Linksys Combo PCMCIA Ethernetcard from ebay, the Card works good with my PIII Notebook so it works.

Now i have download the cnet.device and amiTCP4.0 Demo and copied it to Amiga.

cnet.device i copyed to sys:devs/networks

The big Problem is, in AmiTCP Setup i must use an interfacecard but i cannot find the cnet.device there an have only the following interfaces:

None ()
SLIP/CSLIP
PPP
X.25
Ethernet
Arcnet
GGBus+ Ethernet

When i use the Ethernet, i come to an menu where i can select 5 different types of network interface:

CBM A2065
Hydra Ethernet
Golden Gate wd80xx (trossi)
ASDG EB920
Village Tronic Ariadne

The Help says when my interface is not there i should take the equivalent card and edit manually later.

So the problem is i not have found cnet.device there and all...
i have no idea how to configure this manually, cos i have no idea, wich file, and what i should write into it

So i wan´t not to connect internet and all, i wan´t to SERVE the Amiga Harddisk so that i can acces with my Windows 2000 PC the Files stored on Amiga to burn the Files Backup with PC.

Please Help

ah i forgot to say:
Connection is through an Netgear RP114 Router, so the Amiga must get IP Dynamically from Router (DHCP) i dunno this work with Amiga?

[snoopdos]

Hello,

thank you for your knowledge.
Have done like you mean, now the Link-Led on Adapter is burning and the data-led is blinking sometimes, still can´t access the network (tried ping command from win2000).
Think have some problems with the dhcp settings from the router but thin i figure it out next time.

greetings snoopy  :-)

[snoopdos]

Hi,

i think i´m to stupid to get it work
Have tried some settings in router setup but works not.
So i i´m tired to test and set and test new to check at least it will still not work... and when it works i think my next problem will be that i can´t access the files from Win2000 via ftp or some like that...

Other is i have setup my router special for 4 PC Network so i don´t like to change something cos i have much problems to get it work so that i like it.

 

I give up sometimes very fast and now in this situation to.
Sure it´s possible to make but don´t have much time to check something damn amiftp and so like.

I will now Transfer the Files via an PCMCIA Flashcard.

Can i use any Compactflashcard with an Adapter ( Typ 1 or 2)  
or is there any Megabyte the maximum, like 16 MB or something like that.