Welcome, Guest. Please login or register.

Author Topic: Wanted to Buy: Agnus Chip for A2000  (Read 3611 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Zac67

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 2890
    • Show all replies
Re: Wanted to Buy: Agnus Chip for A2000
« on: October 14, 2006, 09:43:08 PM »
The pinout differences of PLCC Agnuses are extremely small - not 100% sure if they are completely interchangable though.

However, any 512K/1M Agnus will run in any A500, A2000(B) or CDTV (with proper A19 line jumper setting) - I'm only unsure about the 2M types (A500+, A600, A3000).
 

Offline Zac67

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 2890
    • Show all replies
Re: Wanted to Buy: Agnus Chip for A2000
« Reply #1 on: October 16, 2006, 09:19:39 PM »
I definitely don't recommend using a screwdriver, those old sockets break VERY easily. If you remove the board, you can push through the holes from below - but CAREFUL!!