Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: C128 and 80 columns  (Read 1696 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline gdankoTopic starter

  • Hero Member
  • *****
  • Join Date: Sep 2004
  • Posts: 776
    • Show all replies
C128 and 80 columns
« on: January 28, 2008, 05:08:41 AM »
I have connected my C128 to a 1084S. I have a 40 column cable with the din connector on one end and two "RCA" style jacks on the other end. I have an 80 column cable with "d sub" connectors on both ends. 40 column works perfectly, but when I switch to 80 column mode the display scrolls as if there is a problem with the vertical hold or something. Any ideas what could be wrong here? I looked for a vertical hold adjuster on the monitor but I didn't see one.
Logged
 

Offline gdankoTopic starter

  • Hero Member
  • *****
  • Join Date: Sep 2004
  • Posts: 776
    • Show all replies
Re: C128 and 80 columns
« Reply #1 on: January 28, 2008, 02:07:51 PM »
Quote

TjLaZer wrote:
Um, last I checked this was an Amiga forum?  ;)


Oh knock it off. :P I've found many users here who are also C= 8 bit enthusiasts. I emailed Paul, former owner of the 64 and More Store. He mentioned to me there is a small vertical h old screw on the back. I will check it when I get home. :)
Logged
 

Offline gdankoTopic starter

  • Hero Member
  • *****
  • Join Date: Sep 2004
  • Posts: 776
    • Show all replies
Re: C128 and 80 columns
« Reply #2 on: January 30, 2008, 05:27:43 AM »
I have read from others that the D2 does not support the C128's 80 column mode. :(
Logged
 
Pages: [1]   Go Up
« previous next »