Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: HyperCOM3z and Amiga Explorer  (Read 2037 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline keropiTopic starter

  • Hero Member
  • *****
  • Join Date: Sep 2004
  • Posts: 2466
    • Show all replies
HyperCOM3z and Amiga Explorer
« on: December 23, 2004, 04:52:30 PM »
 just received a HyperCOM3z zorroII fast ser/par IO card, in order to finally run Amiga Explorer at 115200 ...
BUT  although I used the tooltype: SERDEVICE=hyperCOM30Z.device , guess what: I get a "Serial Connection Cannot Be Opened"

any info guys?

Is it possible that I installed the card the wrong way? Is there any place to see the installed zorroII cards?
In showconfig I only see the 1260.... :-?
Logged
 

Offline keropiTopic starter

  • Hero Member
  • *****
  • Join Date: Sep 2004
  • Posts: 2466
    • Show all replies
Re: HyperCOM3z and Amiga Explorer
« Reply #1 on: December 23, 2004, 09:11:01 PM »
Logged
 

Offline keropiTopic starter

  • Hero Member
  • *****
  • Join Date: Sep 2004
  • Posts: 2466
    • Show all replies
Re: HyperCOM3z and Amiga Explorer
« Reply #2 on: December 24, 2004, 08:14:43 AM »
The edges seem clean enough... I use the RBM towerhawk and their RBM zorroII busboard....
Logged
 

Offline keropiTopic starter

  • Hero Member
  • *****
  • Join Date: Sep 2004
  • Posts: 2466
    • Show all replies
Re: HyperCOM3z and Amiga Explorer
« Reply #3 on: December 24, 2004, 09:57:06 AM »
Hmmm, just realised, the erro that Amiga Explorer gives is:
CANNOT OPEN COMUNNICATION PORT
It seems as if the card is not working/recognised...
Is the zorroII bus table-free? Currently the card is installed on the to slot, which is marked Z1 ... I'll try and connect it to Z5 and see if that helps... :-(
Logged
 
Pages: [1]   Go Up
« previous next »