Mr. Mysza drivers needed!!!

[kvasir]

Hello all, I've recently been given a mr. mysza ps/2 to amiga adapter, which I'm using a 3-button+mousewheel GE USB wireless optical, with a p2/2 to usb adapter. I don't have the driver disk, though. I was wondering if anybody has a copy they could e-mail to watertonian@charter.net?

[kvasir]

I think it might be the same product. I did some digging, and it looks like merclantia did the original mr. mysza adapters, but everything shows elbox having them. I noticed merclancia had a few legal probs, and I think elbox picked up the rights to it and marketed under the coclinco name. I sent an e-mail to elbox, and got a reply from them:

Hello, I> > recently was given a Mr. Mysza ps/2 adapter for my Amiga by  my> > brother, but he's lost his disk.  Would you guys still have a .dms or> > .adf archive of the floppy disk? Thanks for any help.

Not sure if it will work, but if you could send it, I'll try and post the results onto this topic. (And the 2 other forums I cross-posted onto  :-D )

[kvasir]

yeah, I've tried freewheel with no luck. It seems to need the driver just to see the middle mouse button and wheel, then uses freewhell to incorporate it.

[kvasir]

I've gotten a copy of the Coclinco drivers from Elbox, and they don't work.  :cry: Looks like I'll have to track down the actual mr. mysza drivers... These things are a bit more rare than I thought....

[kvasir]

Hrmmm.... never thought to check them out... will have to do that.

[kvasir]

@Ilwrath

I'll check with them, too. I remember Pmailing you once about mr. mysa, and you mentioned that your 4000 wasn't doing too well. The drivers are probably in the wbstartup folder, I'm guessing.

@Thomas

Thanks for the e-mail, got the drivers, but they don't work with this adapter . Looks like it needs the actual drivers. Stuff I've checked to date:

mroocheck \
coclinco  / seem to be the same thing

TopolinoIII \
EZMouse     / (Thanks again, Thomas  :-) ) Again, seem to be the same thing

freewheel seems to be needed for any mousewheel, only with the appropriate wheel driver.

Anyway, I'm planning on e-mailing the guys @ big book of amiga hardware concerning the differences between these adapters, and (Owning companies permission allowing) submitting the appropriate drivers to them and the guy who does installer heaven. (2 sites frequently linked while googling the hell out of this project) I'm sure there's more of these things swapping about amiga users, and a new owner might need them as well. Good idea? Bad idea?