AmigaOS 4.1 FE classic and dual GFX board configuration (Radeon and Voodoo 3)

[Boing-ball]

I’m guessing you are using a Mediator? Which way round are the cards situated in the PCI slots?

I remember when I installed OS4.1 FE it would go with the first card it found for RTG. Then would revert to a backup card like my CSVision in the CYBPPC.

I would check devs Monitors to see what monitors are setup.

[Boing-ball]

Maybe worth asking over on the Hyperion forums. I seem to recall a similar issue. The 4.1 install also has P96 pre-installed Maybe worth having a look at the preferences editor to see which card it pickups on.

[Boing-ball]

In Prefs there should be a picasso96mode or p96preference. When you run that it brings up a P96 mode editor which should show the cards it’s picked up on. This will allow you to add and edit/test screen modes. This also allows for the screenmode to be setup for you to choose card and screen modes.

[Boing-ball]

The second card needs a tooltypes entry in Devs Monitors. You may need to run the P96 setup to get that setup and then reboot. Then adding that card into P96mode etc..