Welcome, Guest. Please login or register.

Author Topic: Amissl  (Read 3918 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline bradhansen1Topic starter

  • Full Member
  • ***
  • Join Date: Jan 2019
  • Posts: 219
  • Country: us
  • Gender: Male
    • Show all replies
Amissl
« on: April 21, 2023, 11:55:31 PM »
Hi All, running OS3.2.1 on A1200 with latest IBrowse and Amissl 5.8. But the Amissl won't run,  There was an extra line about Setting up a link, can't remember and can't find it. Was running before no problem, but started over with 3.2.1 and not no go. Any advise would be most helpful and appreciated, Thank you, Brad Hansen
 

Offline bradhansen1Topic starter

  • Full Member
  • ***
  • Join Date: Jan 2019
  • Posts: 219
  • Country: us
  • Gender: Male
    • Show all replies
Re: Amissl
« Reply #1 on: April 22, 2023, 07:35:56 PM »
Thanks for the feedback. If I try to start NetSurf it says Can’t find AmiSSL If I try to load a page, this page, in IBrowse, it says AmiSSL software is too old or not running. I have not had any problem with the software until I updated to OS3.2.1.
Brad Hansen
 

Offline bradhansen1Topic starter

  • Full Member
  • ***
  • Join Date: Jan 2019
  • Posts: 219
  • Country: us
  • Gender: Male
    • Show all replies
Re: Amissl
« Reply #2 on: April 23, 2023, 10:42:38 PM »
Hi, You must be a very busy Amiga guy! Ok, I am now using AmiSSl with
IBrowse. But when I try to load NetSurf it say it can not find AmiSSlmaster.library and kills everything else. So any idea why NetSurf cannot find this Library, must it be in some special place so NetSurf can find it. Or is there a special version of the library to use?
Thanks for all the help!
Brad Hansen