Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: WinUAE doesn't work  (Read 6049 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline AndyFC

Re: WinUAE doesn't work
« on: August 03, 2004, 12:07:41 PM »
I have got the same result with 0.9.9 where old version used to work. I had to hit the reset button on the front of my PC.

I am going to try with a complete re-install tonight (rather than an upgrade), as it didn't detect my roms correctly.
Logged
A1200 in DIY Tower. 3.2 ROMs (softkicking 3.2.3), OS 3.2.3, CF card, CD RW and IDE to SD adapter running off the internal IDE port (using the A4000 4-port IDE adapter from Amigakit), Pistorm 32 lite with Pi4/2GB/Emu68 or Blizzard 1230-IV, with 32MB 60ns RAM and 50MHz 68882 FPU.
MorphOS on PowerMac G5 and ATI 9600 pro
 

Offline AndyFC

Re: WinUAE doesn't work
« Reply #1 on: August 03, 2004, 12:07:55 PM »
Logged
A1200 in DIY Tower. 3.2 ROMs (softkicking 3.2.3), OS 3.2.3, CF card, CD RW and IDE to SD adapter running off the internal IDE port (using the A4000 4-port IDE adapter from Amigakit), Pistorm 32 lite with Pi4/2GB/Emu68 or Blizzard 1230-IV, with 32MB 60ns RAM and 50MHz 68882 FPU.
MorphOS on PowerMac G5 and ATI 9600 pro
 
Pages: [1]   Go Up
« previous next »