Welcome, Guest. Please login or register.

Author Topic: Crash course in CS-PPC! Weirdness!  (Read 4384 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Rob72

  • Newbie
  • *
  • Join Date: Jan 2004
  • Posts: 34
    • Show all replies
Re: Crash course in CS-PPC! Weirdness!
« on: February 10, 2004, 11:31:41 PM »
Manuals for the CS-PPC cards can be found here:

http://www.amiga-hardware.com/manuals/cyberppcpdfmanual.lha

http://www.amiga-hardware.com/manuals/cyberppcman.lha

Good Luck...hope this helps...

EDIT: The PDF manual link, despite stating it is English/German...is German only.

The non PDF is German/ English...scanned jpegs...first half of the files are German, the other half is English.
...
 

Offline Rob72

  • Newbie
  • *
  • Join Date: Jan 2004
  • Posts: 34
    • Show all replies
Re: Crash course in CS-PPC! Weirdness!
« Reply #1 on: February 11, 2004, 12:14:34 AM »
AmiDock will crash everytime without the correct libraries installed in LIBS:

68060.library
68040.library
68040old.library

That goes for a CS-MK-3...not sure about the PPC.

PS. That's two assists...one more, and you have to give me your spare CS-PPC  :-D  ;-)
...
 

Offline Rob72

  • Newbie
  • *
  • Join Date: Jan 2004
  • Posts: 34
    • Show all replies
Re: Crash course in CS-PPC! Weirdness!
« Reply #2 on: February 11, 2004, 01:08:16 AM »
From the latest phase5 68060 library...from Aminet or from:-

http://www.amiga-hardware.com/drivers/drivers/A4000_Accelerators/PPC060Install.dms

or:-

http://amiga.resource.cx/install/P5-SystemDisk-200.dms

You will need to rename the C= 68040.library to 68040old.library in LIBS:

Rename the 68040dummy.library to 68040.library (file size should be much smaller than C= 68040.library), and place in LIBS:

Place the 68060.library in LIBS:

And that should be it... note: this is from memory...i am using a WarpEngine 4040 at the moment... and haven't looked at the above software archives...
...