Welcome, Guest. Please login or register.

Author Topic: a2065 transceiver  (Read 1730 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline orangeTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2796
    • Show all replies
a2065 transceiver
« on: July 04, 2007, 11:13:39 PM »
I bought this transceiver for a2065 card. But it doesn't work  :-(

At first I had a lot of problems with a2065.device (OS3.9) on AmiTCP but they seem to be solved after using ethernet.device from aminet in DEVS:Networks/

I can startnet and ping localhost now, at least. (haven't used any env settings)

But, the transceiver shows NO signs of life. All the diodes are always off. UTP cable is OK. How can I test if its faulty transceiver or a2065 or.. ?
Better sorry than worry.
 

Offline orangeTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2796
    • Show all replies
Re: a2065 transceiver
« Reply #1 on: July 05, 2007, 07:04:53 AM »
but, I had set the jumpers correctly.
Better sorry than worry.
 

Offline orangeTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2796
    • Show all replies
Re: a2065 transceiver
« Reply #2 on: July 07, 2007, 07:30:34 PM »
just checked the a2065 card and the fuse(?) F1 is dead. Could that be the cause? anyway, I'll try replacing it..
Better sorry than worry.
 

Offline orangeTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2796
    • Show all replies
Re: a2065 transceiver
« Reply #3 on: July 07, 2007, 08:33:53 PM »
@Zac67
ok, it says 3/4 A which complies with your schematics so I'll try with 0,7A standard glass fuse. I got 4A picofuse but its better to be safe than sorry.
Better sorry than worry.