Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: CV 64/3D scandoubler?  (Read 2012 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline orangeTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2796
    • Show all replies
CV 64/3D scandoubler?
« on: July 18, 2006, 06:50:39 PM »
Please tell me, is the CV 64/3D scandoubler supposed to show early boot menu/ kickstart screen? (no HDD or other cards attached.) I need to know as soon as possible.



PS.
How can I test it and card itself to see if its working from a floppy disk?


Logged
Better sorry than worry.
 

Offline orangeTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2796
    • Show all replies
Re: CV 64/3D scandoubler?
« Reply #1 on: July 18, 2006, 07:45:50 PM »
Damn, its dead :-(
Is it ok to just leave it plugged in even if its broken? (non 15khz modes work fine)

Its towerized A4000, and veryvery hard to remove all cards.

(The previous owner sold me Amiga with CV 64/3D installed and scandoubler separately, should have suspected it, oh well..)
Logged
Better sorry than worry.
 

Offline orangeTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2796
    • Show all replies
Re: CV 64/3D scandoubler?
« Reply #2 on: July 18, 2006, 07:54:20 PM »
Yes, there are two jumpers and each one consists of three small ones that I guess should all be either on or off.
I have played with them, they should selecet output connector, but nothing..

So, would it be ok to just leave it as it is, inside working Amiga?
Logged
Better sorry than worry.
 

Offline orangeTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2796
    • Show all replies
Re: CV 64/3D scandoubler?
« Reply #3 on: July 18, 2006, 09:45:22 PM »
its towerized A4000, I got Picasso96. When trying to switch to PAL mode the screen freezes.
guess I'll just leave it there, thanx
Logged
Better sorry than worry.
 

Offline orangeTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 2796
    • Show all replies
Re: CV 64/3D scandoubler?
« Reply #4 on: July 18, 2006, 10:30:13 PM »
The manual says jumpers select output port.

BTW, I have seen here that CV 64 is faster than CV64 3D, but how much faster? Is it really noticable in simple tasks? Are there any benchmarks?
Logged
Better sorry than worry.
 
Pages: [1]   Go Up
« previous next »