Converting TV signal from Amiga to HDMI?

[danbeaver]

Side Note:

Those SCART to HDMI transfer audio as well if you use a SCART cable (like Amigaikit's) that allows it;  that being said, MonoPrice is a company with a stupid name that sells excellent products (I have at least 2 of theirs) for reasonable prices.  

They even have features they don't advertize: my 5-port HDMI switcher automatically selects the signal varying the most, but allows selection via the remote or just a finger wave in front of the IR receiver.

[danbeaver]

4 pages of discussion when the solution was nicely summarised by paul1981 in post #5.  

The indivision not only provides the best quality output but also provides 1024x768 and 1920x1280 resolutions.

Welcome to Forum Discussions!

[danbeaver]

It is spelled, "DanBeaver," as the last name is British, derived from "Beaverbrook."

[danbeaver]

I hate to throw fuel on the fire, but a thread on EAB. (http://eab.abime.net/showthread.php?t=76349) about the Framemeister (http://solarisjapan.com/products/xrgb-mini-framemeister-compact-up-scaler-unit) May do this.  Big Dogs with deep pockets ($300 USD) need only apply.

[danbeaver]

Those were not discussed in the thread.

[danbeaver]

I'm sorry but have you checked prices & availability (DVDO Edge is discontinued and only for sale on eBay beginning at $202 USD used or $500 new) and the DVDO VP30 is $2000 USD (or used on eBay for $185 X1 vs $230 USD).

[danbeaver]

The FM sells for $292 USD plus shipping (3 options) via Solaris and is new sans eBay BS.

[danbeaver]

Well if it arrived dead and you open it, then you void your warranty.

[danbeaver]

Well, I've gotten 3 SCART to HDMI converters and they all work first thing right out of the box, so contacting the seller is a good idea.

[danbeaver]

I too have a fine SCART cable from Amigakit, plus 2 other from a well known Amigan in Greece.  All work well.  Now I do use the SCART to HDMI converters, but they work on all my monitors and TVs

[danbeaver]

Are you referring to the SCART to Component adapter?

[danbeaver]

Ian Steadman's schematic has a 330 ohm resistor on the Csync with the RGB going straight thru

[danbeaver]

His latest version had 220uF caps on each of the RGB lines Iirc.

Oh, you mean the schematic that says, "Provisional design for trial use only?"

[danbeaver]

I love my new Framemeister!