0 Members and 1 Guest are viewing this topic.
Which 3 things do you want to do with the Prisma card?The card project is still ongoing, including driver development, so those areas might be covered down the line.
Has anybody figured out what the four headers on the breakout card are, yet?1 - Input from Paula/external RCA jacks to mixer (if it works, as evidenced by the previous video it only seemed to work on one channel)2 - Mixed output to speakers3 - ?4 - ?That, to me, is a "minor scandal", that after three years of development they missed something as obvious as documenting what the connectors are.
If you have a sound card like an SB128 or an FM801 you probably already have Paula connecting into the line-in of this card. You could route the speaker out from the sound card to the line in of the Prisma. Or connect the speaker-out from Prisma to the line in of the sound card.The issue Dan was having of only one channel working is probably just a bad solder joint or a dodgy connector somewhere, bad luck that it went to someone that would post a review.Some documentation of those extra two connectors would be nice. Maybe they do nothing and are for future expansion.
